EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Heat Transfer Enhancement and Latent Thermal Energy Storage in Greenhouses Using Phase Change Material–Metal Foam Composites: A CFD Investigation

Atef Chibani, Ayache Boultif, Tawfiq Chekifi, Farhan Lafta Rashid, Arman Ameen, Selman Djeffal, Mohamed Razi Morakchi, Samir Gouga, Kamel Mesmoudi, Oussama Benbouaziz, Mohamed Kezzar, Moustafa Boukraa

Energies · 13.11.2026 · 19 (22) · 5465

DOI: 10.3390/en19225465 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 13.11.2026. Verfasst von Atef Chibani und 11 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Greenhouses operating in hot, arid climates are exposed to large solar gains during the day and significant heat losses at night, which makes passive thermal buffering attractive. In this work, a north-wall storage layer made of the paraffin RT25 is embedded in aluminum, copper or steel foam, and its effect on the greenhouse microclimate is analyzed with a transient two-dimensional CFD model that couples porous-medium resistance, discrete-ordinates solar radiation, turbulent airflow and enthalpy–porosity phase change. Each composite is evaluated against an otherwise identical pure-RT25 wall. The simulated temperature, liquid-fraction, enthalpy and velocity fields show that the foam material modifies conductive heat spreading inside the wall, the timing of latent storage and the buoyancy-driven circulation in the enclosure. The thermal and phase-change results correspond to a 45 °C exterior/15 °C nighttime scenario, while the airflow profiles correspond to a separate 45 °C/10 °C scenario. A single foam pore density (20 PPI) is examined, so no pore-density optimum is claimed. Against a building-roof PCM experiment, the model reproduces the measured inner roof-surface temperature history with a root-mean-square error of 0.21 °C; this benchmark supports the thermal response of the PCM layer but not the complete greenhouse–foam system. Because no HVAC load balance is solved, the findings are expressed as comparative physical responses rather than as quantified energy savings.

Zitieren

APA

Chibani, A., Boultif, A., Chekifi, T., Rashid, F. L., Ameen, A., Djeffal, S., Morakchi, M. R., Gouga, S., Mesmoudi, K., Benbouaziz, O., Kezzar, M., & Boukraa, M. (2026). Heat Transfer Enhancement and Latent Thermal Energy Storage in Greenhouses Using Phase Change Material–Metal Foam Composites: A CFD Investigation. Energies, 19(22), 5465. https://doi.org/10.3390/en19225465

Vancouver

Chibani A, Boultif A, Chekifi T, Rashid FL, Ameen A, Djeffal S, et al. Heat Transfer Enhancement and Latent Thermal Energy Storage in Greenhouses Using Phase Change Material–Metal Foam Composites: A CFD Investigation. Energies. 2026;19(22):5465. doi:10.3390/en19225465

BibTeX
@article{Chibani2026,
  author = {Chibani, Atef and Boultif, Ayache and Chekifi, Tawfiq and Rashid, Farhan Lafta and Ameen, Arman and Djeffal, Selman and Morakchi, Mohamed Razi and Gouga, Samir and Mesmoudi, Kamel and Benbouaziz, Oussama and Kezzar, Mohamed and Boukraa, Moustafa},
  title = {Heat Transfer Enhancement and Latent Thermal Energy Storage in Greenhouses Using Phase Change Material–Metal Foam Composites: A CFD Investigation},
  journal = {Energies},
  year = {2026},
  volume = {19},
  number = {22},
  pages = {5465},
  doi = {10.3390/en19225465}
}
Kostenlos starten →