Research on Properties of PBAT/CaCO3 Composite Films Modified with Titanate Coupling Agent
Polymers · 19.05.2023 · 15 (10) · 2379
DOI: 10.3390/polym15102379 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 19.05.2023. Verfasst von Zhekun Liu und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Shandong University of Technology, Zibo 255000, China. Die Arbeit wurde bisher 39-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shandong Province Science and Technology Small and Medium Enterprises Innovation Capacity Enhancement Project, Zhangdian District School City Integration Development Program Project, Shandong University of Technology—Yiyuan County Industrial Technology Research Institute Science and Technology Project.
Abstract (Originalsprache)
High cost, low crystallinity, and low-melt strength limit the market application of the biodegradable material poly (butylene adipate-co-terephthalate) (PBAT), which has become a major obstacle to the promotion of PBAT products. Herein, with PBAT as resin matrix and calcium carbonate (CaCO3) as filler, PBAT/CaCO3 composite films were designed and prepared with a twin-screw extruder and single-screw extrusion blow-molding machine designed, and the effects of particle size (1250 mesh, 2000 mesh), particle content (0–36%) and titanate coupling agent (TC) surface modification of CaCO3 on the properties of PBAT/CaCO3 composite film were investigated. The results showed that the size and content of CaCO3 particles had a significant effect on the tensile properties of the composites. The addition of unmodified CaCO3 decreased the tensile properties of the composites by more than 30%. TC-modified CaCO3 improved the overall performance of PBAT/CaCO3 composite films. The thermal analysis showed that the addition of titanate coupling agent 201 (TC-2) increased the decomposition temperature of CaCO3 from 533.9 °C to 566.1 °C, thereby enhancing the thermal stability of the material. Due to the heterogeneous nucleation of CaCO3, the addition of modified CaCO3 raised the crystallization temperature of the film from 97.51 °C to 99.67 °C and increased the degree of crystallization from 7.09% to 14.83%. The tensile property test results showed that the film reached the maximum tensile strength of 20.55 MPa with the addition of TC-2 at 1%. The results of contact angle, water absorption, and water vapor transmission performance tests showed that TC-2 modified CaCO3 increased the water contact angle of the composite film from 85.7° to 94.6° and decreased the water absorption from 13% to 1%. When the additional amount of TC-2 was 1%, the water vapor transmission rate of the composites was reduced by 27.99%, and the water vapor permeability coefficient was reduced by 43.19%.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Shandong University of Technology, Zibo 255000, China.
ORCID-Profile: Guannan Ju
Förderung
- Shandong Province Science and Technology Small and Medium Enterprises Innovation Capacity Enhancement Project
- Zhangdian District School City Integration Development Program Project
- Shandong University of Technology—Yiyuan County Industrial Technology Research Institute Science and Technology Project
Zitieren
APA
Liu, Z., Meng, F., Tang, X., Su, C., Mu, Q., & Ju, G. (2023). Research on Properties of PBAT/CaCO3 Composite Films Modified with Titanate Coupling Agent. Polymers, 15(10), 2379. https://doi.org/10.3390/polym15102379
Vancouver
Liu Z, Meng F, Tang X, Su C, Mu Q, Ju G. Research on Properties of PBAT/CaCO3 Composite Films Modified with Titanate Coupling Agent. Polymers. 2023;15(10):2379. doi:10.3390/polym15102379
BibTeX
@article{Liu2023,
author = {Liu, Zhekun and Meng, Fantao and Tang, Xianggang and Su, Chengzhuang and Mu, Qinglin and Ju, Guannan},
title = {Research on Properties of PBAT/CaCO3 Composite Films Modified with Titanate Coupling Agent},
journal = {Polymers},
year = {2023},
volume = {15},
number = {10},
pages = {2379},
doi = {10.3390/polym15102379}
}
EUVIMED