In Vitro Optical and Physical Stability of Resin Composite Materials with Different Filler Characteristics
Polymers · 29.04.2023 · 15 (9) · 2121
DOI: 10.3390/polym15092121 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 29.04.2023. Verfasst von Md Sofiqul Islam und 5 weiteren Autor:innen. Beteiligte Einrichtung: RAK College of Dental Sciences, RAK Medical and Health Sciences University, Ras Al-Khaimah P.O. Box 12973, United Arab Emirates. Die Arbeit wurde bisher 55-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: RAK College of Dental Sciences, RAK Medical and Health Sciences University.
Abstract (Originalsprache)
The objective of this study was to compare the physical and optical stability of resin composite materials with different filler characteristics. Ninety-six resin composite blocks (6 mm × 6 mm × 2 mm) were prepared using four different types of resin composite, divided into four groups. Specimens from the same material were randomly divided into four groups (n = 6) and allocated for Vickers hardness (VH), water sorption, solubility (WS/SL), and staining and aging challenges tests. One-way ANOVA showed significant differences in microhardness (p = 0.0001), WS (p = 0.0001), and SL (p = 0.003) among the tested groups. Beautifil II LS recorded the highest hardness, and CharmFil®Flow had the lowest value. Beautifil Injectable X and II LS showed negative WS, whereas the other groups had positive values. All groups showed positive SL. Repeated measures ANOVA showed significant color parameter alteration in the tested groups (p = 0.0001). All groups showed significant color shifting after one week of the staining challenge. Repeated measures ANOVA showed a significant color parameter (p = 0.0001) and weight (p = 0.001) alteration after the aging challenge. The optical and physical stability of resin composites may vary according to filler characteristics. Clinicians should choose the composite as per the desired outcome.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- RAK College of Dental Sciences, RAK Medical and Health Sciences University, Ras Al-Khaimah P.O. Box 12973, United Arab Emirates.
- Department of Preventive and Restorative Dentistry, College of Dental Medicine, University of Sharjah, Sharjah P.O. Box 27272, United Arab Emirates.
- Department of Endodontics, Faculty of Dentistry, Assiut University, Assiut 71515, Egypt.
ORCID-Profile: Md Sofiqul Islam, Mohannad Nassar, Mohamed Ahmed Elsayed, Dania Burhan Jameel, Thana Tariq Ahmad
Förderung
- RAK College of Dental Sciences, RAK Medical and Health Sciences University
Zitieren
APA
Islam, M. S., Nassar, M., Elsayed, M. A., Jameel, D. B., Ahmad, T. T., & Rahman, M. M. (2023). In Vitro Optical and Physical Stability of Resin Composite Materials with Different Filler Characteristics. Polymers, 15(9), 2121. https://doi.org/10.3390/polym15092121
Vancouver
Islam MS, Nassar M, Elsayed MA, Jameel DB, Ahmad TT, Rahman MM. In Vitro Optical and Physical Stability of Resin Composite Materials with Different Filler Characteristics. Polymers. 2023;15(9):2121. doi:10.3390/polym15092121
BibTeX
@article{Islam2023,
author = {Islam, Md Sofiqul and Nassar, Mohannad and Elsayed, Mohamed Ahmed and Jameel, Dania Burhan and Ahmad, Thana Tariq and Rahman, Muhammed Mustahsen},
title = {In Vitro Optical and Physical Stability of Resin Composite Materials with Different Filler Characteristics},
journal = {Polymers},
year = {2023},
volume = {15},
number = {9},
pages = {2121},
doi = {10.3390/polym15092121}
}
EUVIMED