EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Magneto-Mechanical and Thermal Properties of Nd-Fe-B-Epoxy-Bonded Composite Materials

Aleksandar Grujić, Dragutin Nedeljković iD, Jasna Stajić-Trošić, Mirko Z Stijepović, Sabla Alnouri, Srdjan Perišić iD

Polymers · 14.04.2023 · 15 (8) · 1894

DOI: 10.3390/polym15081894 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 14.04.2023. Verfasst von Aleksandar Grujić und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Chemistry, Technology and Metallurgy, National Institute of the Republic of Serbia, University of Belgrade, Njegoševa 12, 11000 Belgrade…. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science, Technological Development and Innovation of the Republic of Serbia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer-bonded magnets are a class of composite material that combines the magnetic properties of metal particles and the molding possibility of a polymeric matrix. This class of materials has shown huge potential for various applications in industry and engineering. Traditional research in this field has so far mainly focused on mechanical, electrical or magnetic properties of the composite, or on particle size and distribution. This examination of synthesized Nd-Fe-B-epoxy composite materials includes the mutual comparison of impact toughness, fatigue, and the structural, thermal, dynamic-mechanical, and magnetic behavior of materials with different content of magnetic Nd-Fe-B particles, in a wide range from 5 to 95 wt.%. This paper tests the influence of the Nd-Fe-B content on impacting the toughness of the composite material, as this relationship has not been tested before. The results show that impact toughness decreases, while magnetic properties increase, along with increasing content of Nd-Fe-B. Based on the observed trends, selected samples have been analyzed in terms of crack growth rate behavior. Analysis of the fracture surface morphology reveals the formation of a stable and homogeneous composite material. The synthesis route, the applied methods of characterization and analysis, and the comparison of the obtained results can provide a composite material with optimum properties for a specific purpose.

Schlagwörter

Stichwörter der Autor:innen

DMANd-Fe-Bbonded magnetscompositesepoxyimpact toughnessmagnetic materials

Autor:innen und Institutionen

  • Institute of Chemistry, Technology and Metallurgy, National Institute of the Republic of Serbia, University of Belgrade, Njegoševa 12, 11000 Belgrade, Serbia.
  • Faculty of Technology and Metallurgy, University of Belgrade, 11000 Belgrade, Serbia.
  • Gas Processing Centre, College of Engineering, Qatar University, Doha P.O. Box 2713, Qatar.
  • Innovation Center of Faculty of Technology and Metallurgy, University of Belgrade, 11000 Belgrade, Serbia.

ORCID-Profile: Dragutin Nedeljković, Srdjan Perišić

Förderung

  • Ministry of Science, Technological Development and Innovation of the Republic of Serbia

Zitieren

APA

Grujić, A., Nedeljković, D., Stajić-Trošić, J., Stijepović, M. Z., Alnouri, S., & Perišić, S. (2023). Magneto-Mechanical and Thermal Properties of Nd-Fe-B-Epoxy-Bonded Composite Materials. Polymers, 15(8), 1894. https://doi.org/10.3390/polym15081894

Vancouver

Grujić A, Nedeljković D, Stajić-Trošić J, Stijepović MZ, Alnouri S, Perišić S. Magneto-Mechanical and Thermal Properties of Nd-Fe-B-Epoxy-Bonded Composite Materials. Polymers. 2023;15(8):1894. doi:10.3390/polym15081894

BibTeX
@article{Gruji2023,
  author = {Grujić, Aleksandar and Nedeljković, Dragutin and Stajić-Trošić, Jasna and Stijepović, Mirko Z and Alnouri, Sabla and Perišić, Srdjan},
  title = {Magneto-Mechanical and Thermal Properties of Nd-Fe-B-Epoxy-Bonded Composite Materials},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {8},
  pages = {1894},
  doi = {10.3390/polym15081894}
}
Kostenlos starten →