Mechanical, wear and thermal properties of natural fiber-reinforced epoxy composite: cotton, sisal, coir and wool fibers
Journal of Materials Science · 2024-06 · 59 (24) · 10844-10857
DOI: 10.1007/s10853-024-09810-2 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Materials Science, online erschienen am 29.05.2024. Verfasst von Yahya Tasgin und 3 weiteren Autor:innen. Die Arbeit wurde bisher 98-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Harran University.
Abstract (Originalsprache)
Natural fiber-reinforced epoxy composites (NFRCs) have gained significant attention in recent years due to their potential as environmentally friendly and sustainable materials. These composites combine natural fibers, derived from plants, with epoxy resins to create a material with enhanced properties. The objective of this study is to investigate the mechanical, wear and thermal properties of NFRCs incorporating cotton, sisal, coir and wool fibers. The vacuum-assisted resin transfer molding (VARTM) technique was employed to produce composite plates, followed by conducting tests on tensile, wear and thermal properties. The cotton composite showcased the highest tensile strength, reaching 52.81 MPa, while the coir composite exhibited the lowest, measuring 15.34 MPa. Sisal composite exhibited a moderate wear rate (1.423 mm 3 /Nm) and a lower coefficient of friction (0.233), implying smoother relative motion. Coir composite presented the highest wear rate (4.615 mm 3 /Nm), attributed to its coarse fiber nature. Thermal conductivity is highest at cotton composite (1.017 W/mK) and is lowest at coir composite (0.187 W/mK). Additionally, the highest specific heat was observed in the coir composite (26.313 MJ/m 3 K). Cotton demonstrated potential for efficient heat transfer, while wool outperformed in insulation. Sisal displayed versatility for structural applications. Coir emerged as an effective insulator with energy-saving applications.
Förderung
- Harran University
Zitieren
APA
Tasgin, Y., Demircan, G., Kandemir, S., & Acikgoz, A. (2024). Mechanical, wear and thermal properties of natural fiber-reinforced epoxy composite: cotton, sisal, coir and wool fibers. Journal of Materials Science, 59(24), 10844-10857. https://doi.org/10.1007/s10853-024-09810-2
Vancouver
Tasgin Y, Demircan G, Kandemir S, Acikgoz A. Mechanical, wear and thermal properties of natural fiber-reinforced epoxy composite: cotton, sisal, coir and wool fibers. Journal of Materials Science. 2024;59(24):10844-10857. doi:10.1007/s10853-024-09810-2
BibTeX
@article{Tasgin2024,
author = {Tasgin, Yahya and Demircan, Gokhan and Kandemir, Seckin and Acikgoz, Abuzer},
title = {Mechanical, wear and thermal properties of natural fiber-reinforced epoxy composite: cotton, sisal, coir and wool fibers},
journal = {Journal of Materials Science},
year = {2024},
volume = {59},
number = {24},
pages = {10844--10857},
doi = {10.1007/s10853-024-09810-2}
}
EUVIMED