Prediction of Mechanical Properties for Carbon fiber/PLA Composite Lattice Structures Using Mathematical and ANFIS Models
Polymers · 30.03.2023 · 15 (7) · 1720
DOI: 10.3390/polym15071720 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 30.03.2023. Verfasst von Mustafa Saleh und 3 weiteren Autor:innen. Beteiligte Einrichtung: Industrial Engineering Department, College of Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia. Die Arbeit wurde bisher 55-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deputyship for Research & Innovation, "Ministry of Education" in Saudi Arabia, Deputyship for Research & Innovation, “Ministry of Education” in Saudi Arabia.
Abstract (Originalsprache)
This study investigates the influence of design, relative density (RD), and carbon fiber (CF) incorporation parameters on mechanical characteristics, including compressive modulus (E), strength, and specific energy absorption (SEA) of triply periodic minimum surface (TPMS) lattice structures. The TPMS lattices were 3D-printed by fused filament fabrication (FFF) using polylactic acid (PLA) and carbon fiber-reinforced PLA(CFRPLA). The mechanical properties of the TPMS lattice structures were evaluated under uniaxial compression testing based on the design of experiments (DOE) approach, namely, full factorial design. Prediction modeling was conducted and compared using mathematical and intelligent modeling, namely, adaptive neuro-fuzzy inference systems (ANFIS). ANFIS modeling allowed the 3D printing imperfections (e.g., RD variations) to be taken into account by considering the actual RDs instead of the designed ones, as in the case of mathematical modeling. In this regard, this was the first time the ANFIS modeling utilized the actual RDs. The desirability approach was applied for multi-objective optimization. The mechanical properties were found to be significantly influenced by cell type, cell size, CF incorporation, and RD, as well as their combination. The findings demonstrated a variation in the E (0.144 GPa to 0.549 GPa), compressive strength (4.583 MPa to 15.768 MPa), and SEA (3.759 J/g to 15.591 J/g) due to the effect of the studied variables. The ANFIS models outperformed mathematical models in predicting all mechanical characteristics, including E, strength, and SEA. For instance, the maximum absolute percent deviation was 7.61% for ANFIS prediction, while it was 21.11% for mathematical prediction. The accuracy of mathematical predictions is highly influenced by the degree of RD deviation: a higher deviation in RD indicates a lower accuracy of predictions. The findings of this study provide a prior prediction of the mechanical behavior of PLA and CFRPLA TPMS structures, as well as a better understanding of their potential and limitations.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Industrial Engineering Department, College of Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia.
ORCID-Profile: Mustafa Saleh, Saqib Anwar, Abdulrahman M Al-Ahmari, Abdullah Yahia AlFaify
Förderung
- Deputyship for Research & Innovation, "Ministry of Education" in Saudi Arabia
- Deputyship for Research & Innovation, “Ministry of Education” in Saudi Arabia
Zitieren
APA
Saleh, M., Anwar, S., Al-Ahmari, A. M., & AlFaify, A. Y. (2023). Prediction of Mechanical Properties for Carbon fiber/PLA Composite Lattice Structures Using Mathematical and ANFIS Models. Polymers, 15(7), 1720. https://doi.org/10.3390/polym15071720
Vancouver
Saleh M, Anwar S, Al-Ahmari AM, AlFaify AY. Prediction of Mechanical Properties for Carbon fiber/PLA Composite Lattice Structures Using Mathematical and ANFIS Models. Polymers. 2023;15(7):1720. doi:10.3390/polym15071720
BibTeX
@article{Saleh2023,
author = {Saleh, Mustafa and Anwar, Saqib and Al-Ahmari, Abdulrahman M and AlFaify, Abdullah Yahia},
title = {Prediction of Mechanical Properties for Carbon fiber/PLA Composite Lattice Structures Using Mathematical and ANFIS Models},
journal = {Polymers},
year = {2023},
volume = {15},
number = {7},
pages = {1720},
doi = {10.3390/polym15071720}
}
EUVIMED