Solid Rocket Propellant Photo-Polymerization with an In-House LED-UV Prototype
Polymers · 24.03.2023 · 15 (7) · 1633
DOI: 10.3390/polym15071633 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 24.03.2023. Verfasst von Andrea Galavotti und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Aerospace Science and Technology, Politecnico di Milano, Via La Masa 34, 20156 Milano, Italy. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fondazione Compagnia di San Paolo.
Abstract (Originalsprache)
Composite solid propellants have used cast molding production technology for many decades, with intrinsic limitations on production flexibility, promptness, and grain geometry, as well as environmental implications on toxicity and global carbon footprint. This traditional method involves the use of toxic chemicals, has a long processing time, requires high temperature, and the products have limited geometries. To overcome those issues, different photo-curable resins have been evaluated as possible matrices. In fact, the UV-curing process is fast and has low energy consumption. The photocuring reaction parameters of six different pristine formulations were evaluated by Fourier transform infrared spectroscopy analysis. After finding the optimal curing parameters, different composites were prepared by adding 75 or 80 wt% ammonium sulfate particles used as an inert replacement for the oxidant. The thermomechanical properties and thermal resistance of the UV-cured composites were characterized via dynamic thermal-mechanical and thermogravimetric analysis. Subsequently, the mechanical properties of the inert propellants were investigated by tensile tests. The most promising resin systems for the production of solid rocket propellants were then 3D printed by an in-house developed illumination system and the obtained object micro-structure was evaluated by X-ray computed tomography.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Aerospace Science and Technology, Politecnico di Milano, Via La Masa 34, 20156 Milano, Italy.
- Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy.
- Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy.
- Department of Structural, Geotechnical and Building Engineering, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy.
ORCID-Profile: Camilla Noè, Giovanni Polizzi, Paola Antonaci, Filippo Maggi, Filippo Masseni, Dario Pastrone
Förderung
- Fondazione Compagnia di San Paolo
Zitieren
APA
Galavotti, A., Noè, C., Polizzi, G., Antonaci, P., Maggi, F., Masseni, F., & Pastrone, D. (2023). Solid Rocket Propellant Photo-Polymerization with an In-House LED-UV Prototype. Polymers, 15(7), 1633. https://doi.org/10.3390/polym15071633
Vancouver
Galavotti A, Noè C, Polizzi G, Antonaci P, Maggi F, Masseni F, et al. Solid Rocket Propellant Photo-Polymerization with an In-House LED-UV Prototype. Polymers. 2023;15(7):1633. doi:10.3390/polym15071633
BibTeX
@article{Galavotti2023,
author = {Galavotti, Andrea and Noè, Camilla and Polizzi, Giovanni and Antonaci, Paola and Maggi, Filippo and Masseni, Filippo and Pastrone, Dario},
title = {Solid Rocket Propellant Photo-Polymerization with an In-House LED-UV Prototype},
journal = {Polymers},
year = {2023},
volume = {15},
number = {7},
pages = {1633},
doi = {10.3390/polym15071633}
}
EUVIMED