EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Development of Multiwalled Carbon Nanotubes/Halloysite Nanotubes Reinforced Thermal Responsive Shape Memory Polymer Nanocomposites for Enhanced Mechanical and Shape Recovery Characteristics in 4D Printing Applications

Sivanagaraju Namathoti iD, Manikanta Ravindra Kumar Vakkalagadda iD

Polymers · 2023-03-09 · 15 (6) · 1371

DOI: 10.3390/polym15061371 ↗

At a glance

Journal article in Polymers, published online on 2023-03-09. Written by Sivanagaraju Namathoti and 1 co-authors. Institution: School of Mechanical Engineering (SMEC), VIT-AP University, Amaravati 522237, Andhra Pradesh, India. Cited 34 times so far (Crossref); 38 references. The full text is freely available (open access, CC BY 4.0).

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The mechanical and shape-recovery characteristics of 4D-printed thermally responsive shape-memory polyurethane (SMPU) reinforced with two types of reinforcements, multiwalled carbon nanotubes (MWCNTs) and Halloysite nanotubes (HNTs), are investigated in the present study. Three weight percentages of reinforcements (0, 0.5, and 1) in the SMPU matrix are considered, and the required composite specimens are obtained with 3D printing. Further, for the first time, the present study investigates the flexural test for multiple cycles to understand the 4D-printed specimens’ flexural behavior variation after shape recovery. The 1 wt% HNTS-reinforced specimen yielded higher tensile, flexural, and impact strengths. On the other hand, 1 wt% MWCNT-reinforced specimens exhibited quick shape recovery. Overall, enhanced mechanical properties were observed with HNT reinforcements, and a faster shape recovery was observed with MWCNT reinforcements. Further, the results are promising for the use of 4D-printed shape-memory polymer nanocomposites for repeated cycles even after a large bending deformation.

Subjects

Author keywords

4D printingcharacterizationshape memory polymershape-memory effect

Authors and institutions

  • School of Mechanical Engineering (SMEC), VIT-AP University, Amaravati 522237, Andhra Pradesh, India.

ORCID profiles: Sivanagaraju Namathoti, Manikanta Ravindra Kumar Vakkalagadda

Cite

APA

Namathoti, S., & Vakkalagadda, M. R. K. (2023). Development of Multiwalled Carbon Nanotubes/Halloysite Nanotubes Reinforced Thermal Responsive Shape Memory Polymer Nanocomposites for Enhanced Mechanical and Shape Recovery Characteristics in 4D Printing Applications. Polymers, 15(6), 1371. https://doi.org/10.3390/polym15061371

Vancouver

Namathoti S, Vakkalagadda MRK. Development of Multiwalled Carbon Nanotubes/Halloysite Nanotubes Reinforced Thermal Responsive Shape Memory Polymer Nanocomposites for Enhanced Mechanical and Shape Recovery Characteristics in 4D Printing Applications. Polymers. 2023;15(6):1371. doi:10.3390/polym15061371

BibTeX
@article{Namathoti2023,
  author = {Namathoti, Sivanagaraju and Vakkalagadda, Manikanta Ravindra Kumar},
  title = {Development of Multiwalled Carbon Nanotubes/Halloysite Nanotubes Reinforced Thermal Responsive Shape Memory Polymer Nanocomposites for Enhanced Mechanical and Shape Recovery Characteristics in 4D Printing Applications},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {6},
  pages = {1371},
  doi = {10.3390/polym15061371}
}
Start for free →