Sustainable and Green Production of Nanostructured Cellulose by a 2-Step Mechano-Enzymatic Process
Polymers · 2023-02-23 · 15 (5) · 1115
DOI: 10.3390/polym15051115 ↗At a glance
Journal article in Polymers, published online on 2023-02-23. Written by Martina Aulitto and 6 co-authors. Institution: Department of Biology, Università degli Studi di Napoli Federico II, 80138 Napoli, Italy. Cited 10 times so far (Crossref); 46 references. The full text is freely available (open access, CC BY 4.0). Funded by: Ministry of Education, Universities and Research, PRIN 2017-PANACEA CUP.
Abstract (original language)
Nanostructured cellulose (NC) represents an emerging sustainable biomaterial for diverse biotechnological applications; however, its production requires hazardous chemicals that render the process ecologically unfriendly. Using commercial plant-derived cellulose, an innovative strategy for NC production based on the combination of mechanical and enzymatic approaches was proposed as a sustainable alternative to conventional chemical procedures. After ball milling, the average length of the fibers was reduced by one order of magnitude (down to 10–20 μm) and the crystallinity index decreased from 0.54 to 0.07–0.18. Moreover, a 60 min ball milling pre-treatment followed by 3 h Cellic Ctec2 enzymatic hydrolysis led to NC production (15% yield). Analysis of the structural features of NC obtained by the mechano-enzymatic process revealed that the diameters of the obtained cellulose fibrils and particles were in the range of 200–500 nm and approximately 50 nm, respectively. Interestingly, the film-forming property on polyethylene (coating ≅ 2 μm thickness) was successfully demonstrated and a significant reduction (18%) of the oxygen transmission rate was obtained. Altogether, these findings demonstrated that nanostructured cellulose could be successfully produced using a novel, cheap, and rapid 2-step physico-enzymatic process that provides a potential green and sustainable route that could be exploitable in future biorefineries.
Subjects
Author keywords
Authors and institutions
- Department of Biology, Università degli Studi di Napoli Federico II, 80138 Napoli, Italy.
- Biological Systems and Engineering Division, Lawrence Berkeley National Laboratory, Berkeley, CA 94720, USA.
- Institute of Polymers, Composites and Biomaterials (IPCB), National Research Council of Italy (CNR), 80078 Pozzuoli, Italy.
- Tea Research Institute, Chinese Academy of Agricultural Sciences, 9P South Meiling Road, Hangzhou 310008, China.
ORCID profiles: Martina Aulitto, Rachele Castaldo, Yong-Quan Xu, Gennaro Gentile
Funding
- Ministry of Education, Universities and Research
- PRIN 2017-PANACEA CUP
Cite
APA
Aulitto, M., Castaldo, R., Avolio, R., Errico, M. E., Xu, Y. Q., Gentile, G., & Contursi, P. (2023). Sustainable and Green Production of Nanostructured Cellulose by a 2-Step Mechano-Enzymatic Process. Polymers, 15(5), 1115. https://doi.org/10.3390/polym15051115
Vancouver
Aulitto M, Castaldo R, Avolio R, Errico ME, Xu YQ, Gentile G, et al. Sustainable and Green Production of Nanostructured Cellulose by a 2-Step Mechano-Enzymatic Process. Polymers. 2023;15(5):1115. doi:10.3390/polym15051115
BibTeX
@article{Aulitto2023,
author = {Aulitto, Martina and Castaldo, Rachele and Avolio, Roberto and Errico, Maria Emanuela and Xu, Yong-Quan and Gentile, Gennaro and Contursi, Patrizia},
title = {Sustainable and Green Production of Nanostructured Cellulose by a 2-Step Mechano-Enzymatic Process},
journal = {Polymers},
year = {2023},
volume = {15},
number = {5},
pages = {1115},
doi = {10.3390/polym15051115}
}
EUVIMED