Residual Strain Development in Rapid Frontally Curing Polymers
ACS Applied Engineering Materials · 22.11.2024 · 2 (11) · 2597-2607
DOI: 10.1021/acsaenm.4c00526 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Engineering Materials, online erschienen am 31.10.2024. Verfasst von Zhuoting Chen und 5 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering Department, University of Wyoming, Laramie, Wyoming 82071, United States. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. Department of Defense, Wyoming Space Grant Consortium, National Science Foundation.
Abstract (Originalsprache)
Frontal polymerization (FP) has emerged as a rapid and energy-efficient process for fabricating thermoset polymers and composites. In this process, a self-propagating reaction front cures the polymer rapidly by the exothermic heat of polymerization reaction instead of an external heat source. Design for FP-based manufacturing in commercial applications requires more comprehensive characterization and prediction of material evolution and residual deformation throughout the process. Here, we report experimental and numerical studies in response to this need. The experimental study focuses on measuring the temperature and cure-dependent properties of mono/poly dicyclopentadiene to capture the strain evolution during the frontal polymerization process. The experimentally measured elastic moduli, Poisson's ratios, and coefficients of thermal expansion and chemical shrinkage show strong dependence on the degree of cure. Based on the experimental output, a coupled thermo-chemo-mechanical model has been developed to capture the measured residual strains. The chemical shrinkage is closely related to the curing rate, leading to strong localization of residual strains in accelerated reaction regions, especially where two fronts merge. Preheating of the monomer (or gel) at the fronts merging area is suggested as an effective method to mitigate residual deformations.
Autor:innen und Institutionen
- Mechanical Engineering Department, University of Wyoming, Laramie, Wyoming 82071, United States.
- Department of Mechanical Engineering, Rowan University, Glassboro, New Jersey 08028, United States.
- Beckman Institute for Advanced Science and Technology, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801, United States.
- Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801, United States.
- Department of Aerospace Engineering, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801, United States.
ORCID-Profile: Behrad Koohbor, Xiang Zhang, Philippe H Geubelle, Nancy R Sottos
Förderung
- U.S. Department of Defense
- Wyoming Space Grant Consortium
- National Science Foundation
Zitieren
APA
Chen, Z., Koohbor, B., Zhang, X., Dean, L. M., Geubelle, P. H., & Sottos, N. R. (2024). Residual Strain Development in Rapid Frontally Curing Polymers. ACS Applied Engineering Materials, 2(11), 2597-2607. https://doi.org/10.1021/acsaenm.4c00526
Vancouver
Chen Z, Koohbor B, Zhang X, Dean LM, Geubelle PH, Sottos NR. Residual Strain Development in Rapid Frontally Curing Polymers. ACS Applied Engineering Materials. 2024;2(11):2597-2607. doi:10.1021/acsaenm.4c00526
BibTeX
@article{Chen2024,
author = {Chen, Zhuoting and Koohbor, Behrad and Zhang, Xiang and Dean, Leon M and Geubelle, Philippe H and Sottos, Nancy R},
title = {Residual Strain Development in Rapid Frontally Curing Polymers},
journal = {ACS Applied Engineering Materials},
year = {2024},
volume = {2},
number = {11},
pages = {2597--2607},
doi = {10.1021/acsaenm.4c00526}
}
EUVIMED