Noise Evaluation of Coated Polymer Gears
Polymers · 03.02.2023 · 15 (3) · 783
DOI: 10.3390/polym15030783 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 03.02.2023. Verfasst von Brigita Polanec und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, University of Maribor, Smetanova 17, 2000 Maribor, Slovenia. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Republic of Slovenia and the European Union, Slovenian Research Agency.
Abstract (Originalsprache)
A comprehensive experimental investigation of the noise evaluation of coated spur polymer gears made of POM was performed in this study. The three Physical Vapour Deposition (PVD) coatings investigated were aluminium (Al), chromium (Cr), and chromium nitrite (CrN). The gears were tested on an in-house-developed testing machine under a torque of 20 Nm and at a rotational speed of 1000 rpm. The noise measurements were performed with the tested gear pair on the testing device with a sound-proof acoustic foam used for the acoustic sound-proof insulation. The sound signal was analysed in time, frequency, and time–frequency domains and typical phenomena were identified in the signal. Experimental results showed that the noise level was higher for polymer gears with different coatings if compared to the polymer gears without coatings. With sound analysis in the time–frequency domain, precise degradation of the coatings could be noticed. In future studies, it would be appropriate to use a new method for signal analysis, e.g., high-order statistics and hybrid technique.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Mechanical Engineering, University of Maribor, Smetanova 17, 2000 Maribor, Slovenia.
ORCID-Profile: Srečko Glodež
Förderung
- Republic of Slovenia and the European Union
- Slovenian Research Agency
Zitieren
APA
Polanec, B., Glodež, S., & Belšak, A. (2023). Noise Evaluation of Coated Polymer Gears. Polymers, 15(3), 783. https://doi.org/10.3390/polym15030783
Vancouver
Polanec B, Glodež S, Belšak A. Noise Evaluation of Coated Polymer Gears. Polymers. 2023;15(3):783. doi:10.3390/polym15030783
BibTeX
@article{Polanec2023,
author = {Polanec, Brigita and Glodež, Srečko and Belšak, Aleš},
title = {Noise Evaluation of Coated Polymer Gears},
journal = {Polymers},
year = {2023},
volume = {15},
number = {3},
pages = {783},
doi = {10.3390/polym15030783}
}
EUVIMED