EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Vibroacoustic Model for Wear Evaluation of Polymer Gears

Aljaž Ignatijev, Srečko Glodež, Matej Borovinšek, Aleš Belšak

Applied Sciences · 06.11.2026 · 16 (21) · 11000

DOI: 10.3390/app162111000 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 06.11.2026. Verfasst von Aljaž Ignatijev und 3 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Slovenian Research Agency.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The relationship between progressive tooth-flank wear and acoustic indicators in polymer–metal gear transmissions remains insufficiently quantified. In the presented study, an experimental procedure was developed to evaluate the influence of tooth flank wear on the noise behaviour of the POM/steel gear pair. The vibroacoustic analysis was evaluated using time–frequency analysis (TFA) and adapted transform analysis (ATA). The normalised spectral entropy (NSE), the normalised window spectral entropy (NWSE) and the normalised adaptive spectral entropy (NASE) were also considered when evaluating the noise behaviour of the analysed gear pair. The experimental results showed that the sound pressure level increases with increasing gear flank wear. After the running-in phase, a strong correlation was observed between the average wear of the tooth flank and sound pressure level (R2 = 0.962 for stages II–V), whereas entropy indicators showed close associations with wear. The reported entropy–wear fits yielded R2 = 0.994 for NSE, 0.999 for NWSE, and 0.996 for NASE. Frequency and time–frequency analysis of the sound signals showed that the dominant frequency components correspond to the gear meshing frequency (600 Hz) and its higher harmonics, which increase with increasing wear. The results of this study contribute to a better understanding of how wear affects the vibroacoustic response of polymer gears and provide a basis for developing diagnostic methods to detect wear conditions under the investigated conditions. Future research should expand the experimental analysis to different combinations of polymer gear materials and to a wider range of operating conditions, including higher loads and different temperature regimes.

Förderung

  • Slovenian Research Agency

Zitieren

APA

Ignatijev, A., Glodež, S., Borovinšek, M., & Belšak, A. (2026). A Vibroacoustic Model for Wear Evaluation of Polymer Gears. Applied Sciences, 16(21), 11000. https://doi.org/10.3390/app162111000

Vancouver

Ignatijev A, Glodež S, Borovinšek M, Belšak A. A Vibroacoustic Model for Wear Evaluation of Polymer Gears. Applied Sciences. 2026;16(21):11000. doi:10.3390/app162111000

BibTeX
@article{Ignatijev2026,
  author = {Ignatijev, Aljaž and Glodež, Srečko and Borovinšek, Matej and Belšak, Aleš},
  title = {A Vibroacoustic Model for Wear Evaluation of Polymer Gears},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {21},
  pages = {11000},
  doi = {10.3390/app162111000}
}
Kostenlos starten →