The Mechanical Properties of Nanocomposites Reinforced with PA6 Electrospun Nanofibers
Polymers · 28.01.2023 · 15 (3) · 673
DOI: 10.3390/polym15030673 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 28.01.2023. Verfasst von Inga Lasenko und 8 weiteren Autor:innen. Beteiligte Einrichtung: Mechanics and Biotextile Research Laboratory, Riga Technical University, 3/3-20 Pulka Street, LV-1007 Riga, Latvia. Die Arbeit wurde bisher 61-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Riga Technical University.
Abstract (Originalsprache)
Electrospun nanofibers are very popular in polymer nanocomposites because they have a high aspect ratio, a large surface area, and good mechanical properties, which gives them a broad range of uses. The application of nonwoven structures of electrospun nanofiber mats has historically been limited to enhancing the interlaminar responses of fiber-reinforced composites. However, the potential of oriented nanofibers to improve the characteristics of bulk matrices cannot be overstated. In this research, a multilayered laminate composite was created by introducing polyamide (PA6)-oriented nanofibers into an epoxy matrix in order to examine the effect of the nanofibers on the tensile and thermal characteristics of the nanocomposite. The specimens’ fracture surfaces were examined using scanning electron microscopy (SEM). Using differential scanning calorimetry (DSC) analysis, the thermal characteristics of the nanofiber-layered composites were investigated. The results demonstrated a 10.58% peak in the nanocomposites’ elastic modulus, which was compared to the numerical simulation and the analytical model. This work proposes a technique for the development of lightweight high-performance nanocomposites.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Mechanics and Biotextile Research Laboratory, Riga Technical University, 3/3-20 Pulka Street, LV-1007 Riga, Latvia.
- Department of Theoretical Mechanics and Strength of Materials, Institute of Mechanics and Mechanical Engineering, Riga Technical University, 6B Kipsala Street, LV-1048 Riga, Latvia.
- Department of Molecular Biology, Faculty of Biology, Latvian University, Jelgavas Street 1, LV-1004 Riga, Latvia.
ORCID-Profile: Inga Lasenko, Jaymin Vrajlal Sanchaniya, Vitalijs Lusis
Förderung
- Riga Technical University
Zitieren
APA
Lasenko, I., Sanchaniya, J. V., Kanukuntla, S. P., Ladani, Y., Viluma-Gudmona, A., Kononova, O., Lusis, V., Tipans, I., & Selga, T. (2023). The Mechanical Properties of Nanocomposites Reinforced with PA6 Electrospun Nanofibers. Polymers, 15(3), 673. https://doi.org/10.3390/polym15030673
Vancouver
Lasenko I, Sanchaniya JV, Kanukuntla SP, Ladani Y, Viluma-Gudmona A, Kononova O, et al. The Mechanical Properties of Nanocomposites Reinforced with PA6 Electrospun Nanofibers. Polymers. 2023;15(3):673. doi:10.3390/polym15030673
BibTeX
@article{Lasenko2023,
author = {Lasenko, Inga and Sanchaniya, Jaymin Vrajlal and Kanukuntla, Sai Pavan and Ladani, Yagnik and Viluma-Gudmona, Arta and Kononova, Olga and Lusis, Vitalijs and Tipans, Igors and Selga, Turs},
title = {The Mechanical Properties of Nanocomposites Reinforced with PA6 Electrospun Nanofibers},
journal = {Polymers},
year = {2023},
volume = {15},
number = {3},
pages = {673},
doi = {10.3390/polym15030673}
}
EUVIMED