Comparative Investigations on Properties of Three Kinds of FDM 3D-Printed Natural Plant Powder/Poly(lactic acid) Biocomposites
Polymers · 21.01.2023 · 15 (3) · 557
DOI: 10.3390/polym15030557 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 21.01.2023. Verfasst von Dezhi Xu und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Science, Nanjing Forestry University, Nanjing 210037, China. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Natural Science Foundation of the Jiangsu Higher Education Institutions of China.
Abstract (Originalsprache)
In order to further explore the feasibility of the application of the residue of Chinese herbal medicine in FDM 3D technology and enrich the kinds of printing materials, Astragalus residue powder(ARP)/poly(lactic acid) (PLA) biocomposite was FDM 3D-printed, meanwhile, two traditional biocomposites, i.e., wood flour (WF)/PLA and rice straw powder (RSP)/PLA, were prepared by the same method, and the properties of the biocomposites were comparatively investigated. The results showed that, the tensile and flexural strengths of ARP/PLA were 28.33 MPa and 97.60 MPa, respectively, which were 2.85% and 10.89% smaller than those of WF/PLA, while 15.73% and 7.04% greater than those of RSP/PLA. WF/PLA showed typical brittle fracture characteristics, ARP/PLA and RSP/PLA both showed ductile fracture, but not obviously. Among the three kinds of biocomposites, ARP/PLA was the most thermally stable, followed by WF/PLA and RSP/PLA in turn. The incorporation of natural plant powder had no significant effect on the glassy transition, melting, and cold-crystallization behaviors of PLA, but the crystallinity of PLA could be increased from 0.3% to 2.0% and 1.9%, respectively, by adding ARP and WF. At 20 °C, the storage modulus of ARP/PLA, WF/PLA and RSP/PLA was 2759.4 MPa, 3361.3 MPa, and 2691.5 MPa, respectively, indicating that WF/PLA has the greatest stiffness, and the stiffness of RSP/PLA was the least. In addition to these, all the biocomposites were hydrophilic, the contact angle of the distilled water on the surface of ARP/PLA, WF/PLA or RSP/PLA was correspondingly 73.5°, 77.6° and 71.2°. Overall, it can be concluded that ARP/PLA has moderate strengths, stiffness and wettability, meanwhile, it is the most thermal stable among the three biocomposites, and can be processed at a temperature close to that of PLA. ARP/PLA is suitable as a new kind of feedstock material for FDM 3D printing.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Science, Nanjing Forestry University, Nanjing 210037, China.
- Organization Department of the Party Committee, Nanjing Vocational University of Industry Technology, Nanjing 210023, China.
- School of Mechanical Engineering, Nanjing Vocational University of Industry Technology, Nanjing 210023, China.
ORCID-Profile: Wangwang Yu
Förderung
- The Natural Science Foundation of the Jiangsu Higher Education Institutions of China
Zitieren
APA
Xu, D., Shi, J., Qiu, R., Lei, W., & Yu, W. (2023). Comparative Investigations on Properties of Three Kinds of FDM 3D-Printed Natural Plant Powder/Poly(lactic acid) Biocomposites. Polymers, 15(3), 557. https://doi.org/10.3390/polym15030557
Vancouver
Xu D, Shi J, Qiu R, Lei W, Yu W. Comparative Investigations on Properties of Three Kinds of FDM 3D-Printed Natural Plant Powder/Poly(lactic acid) Biocomposites. Polymers. 2023;15(3):557. doi:10.3390/polym15030557
BibTeX
@article{Xu2023,
author = {Xu, Dezhi and Shi, Jianan and Qiu, Rui and Lei, Wen and Yu, Wangwang},
title = {Comparative Investigations on Properties of Three Kinds of FDM 3D-Printed Natural Plant Powder/Poly(lactic acid) Biocomposites},
journal = {Polymers},
year = {2023},
volume = {15},
number = {3},
pages = {557},
doi = {10.3390/polym15030557}
}
EUVIMED