Thermal and Gluing Properties of Phenol-Based Resin with Lignin for Potential Application in Structural Composites
Polymers · 10.01.2023 · 15 (2) · 357
DOI: 10.3390/polym15020357 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 10.01.2023. Verfasst von Danilo Soares Galdino und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, São Paulo State University (UNESP), 333 Doutor Ariberto Pereira da Cunha Avenue, Guaratinguetá 12516-410, Brazi…. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: São Paulo Research Foundation, Pró-Reitoria de Pesquisa, Inovação e Pós-Graduação of Instituto Federal de Rondônia, Fundação de Amparo à Pesquisa do Estado de São Paulo.
Abstract (Originalsprache)
Using Kraft lignin, bio-based adhesives have been increasingly studied to replace those petrochemical-based solutions, due to low cost, easy availability and the potential for biodegradability of this biomaterial. In this study, lignin-based phenol-formaldehyde (LPF) resins were synthesized using commercial Eucalypt Kraft Lignin (EKL), purified at 95%, as a phenol substitute in different proportions of 10%, 20%, 30% and 50%. The properties of bio-based phenol formaldehyde (BPF) synthesized resin were compared with phenol-formaldehyde resin (PF) used for control sampling. The results indicated that viscosity, gel time and solid contents increased with the addition of pure EKL. The shear strength test of glue line was studied according to American Society for Testing and Materials (ASTM), and BPF-based results were superior to samples bonded with the PF as a control sample, being suitable for structural purposes. Changes in the curing behavior of different resins were analyzed by Differential Scanning Calorimetry (DSC), and sample comparison indicated that the curing of the LPF resin occurred at lower temperatures than the PF. The addition of EKL in PF reduced its thermal stability compared to traditional resin formulation, resulting in a lower decomposition temperature and a smaller amount of carbonaceous residues.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, São Paulo State University (UNESP), 333 Doutor Ariberto Pereira da Cunha Avenue, Guaratinguetá 12516-410, Brazil.
- Civil Engineering Postgraduate Program, Federal University of São Carlos (UFSCar), 235 km Washington Luís Highway, São Carlos 13565-905, Brazil.
- Science and Engineering Institute, São Paulo State University (UNESP), 519 Geraldo Alckmin Street, Itapeva 18409-010, Brazil.
- Campus of Ariquemes, Federal Institute of Education, Science and Technology of Rondônia (IFRO), Ariquemes 76870-000, Brazil.
ORCID-Profile: Danilo Soares Galdino, Marcel Yuzo Kondo, Victor Almeida De Araujo, Emerson Faustino, André Luis Christoforo, Cristiane Inácio de Campos
Förderung
- São Paulo Research Foundation
- Pró-Reitoria de Pesquisa, Inovação e Pós-Graduação of Instituto Federal de Rondônia
- Fundação de Amparo à Pesquisa do Estado de São Paulo
Zitieren
APA
Galdino, D. S., Kondo, M. Y., De Araujo, V. A., Ferrufino, G. L. A. A., Faustino, E., Santos, H. F. D., Christoforo, A. L., Luna, C. M. R., & Campos, C. I. (2023). Thermal and Gluing Properties of Phenol-Based Resin with Lignin for Potential Application in Structural Composites. Polymers, 15(2), 357. https://doi.org/10.3390/polym15020357
Vancouver
Galdino DS, Kondo MY, De Araujo VA, Ferrufino GLAA, Faustino E, Santos HFD, et al. Thermal and Gluing Properties of Phenol-Based Resin with Lignin for Potential Application in Structural Composites. Polymers. 2023;15(2):357. doi:10.3390/polym15020357
BibTeX
@article{Galdino2023,
author = {Galdino, Danilo Soares and Kondo, Marcel Yuzo and De Araujo, Victor Almeida and Ferrufino, Gretta Larisa Aurora Arce and Faustino, Emerson and Santos, Herisson Ferreira Dos and Christoforo, André Luis and Luna, Carlos Manuel Romero and Campos, Cristiane Inácio de},
title = {Thermal and Gluing Properties of Phenol-Based Resin with Lignin for Potential Application in Structural Composites},
journal = {Polymers},
year = {2023},
volume = {15},
number = {2},
pages = {357},
doi = {10.3390/polym15020357}
}
EUVIMED