EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

High-Performance Photoinitiating Systems for LED-Induced Photopolymerization

Shaohui Liu, Timur Borjigin iD, Michael Schmitt iD, Fabrice Morlet-Savary, Pu Xiao, Jacques Lalevée iD

Polymers · 09.01.2023 · 15 (2) · 342

DOI: 10.3390/polym15020342 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 09.01.2023. Verfasst von Shaohui Liu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Centre National de la Recherche Scientifique (CNRS), L'Institut de Science des Matériaux de Mulhouse (IS2M UMR 7361), Université de Haute-Alsace, F-6…. Die Arbeit wurde bisher 48-mal zitiert (Crossref) und nennt 157 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Scholarship Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Currently, increasing attention has been focused on light-emitting diodes (LEDs)-induced photopolymerization. The common LEDs (e.g., LED at 365 nm and LED at 405 nm) possess narrow emission bands. Due to their light absorption properties, most commercial photoinitiators are sensitive to UV light and cannot be optimally activated under visible LED irradiation. Although many photoinitiators have been designed for LED-induced free radical polymerization and cationic polymerization, there is still the issue of the mating between photoinitiators and LEDs. Therefore, the development of novel photoinitiators, which could be applied under LED irradiation, is significant. Many photoinitiating systems have been reported in the past decade. In this review, some recently developed photoinitiators used in LED-induced photopolymerization, mainly in the past 5 years, are summarized and categorized as Type Ⅰ photoinitiators, Type Ⅱ photoinitiators, and dye-based photoinitiating systems. In addition, their light absorption properties and photoinitiation efficiencies are discussed.

Schlagwörter

Stichwörter der Autor:innen

light emitting diodesphotoinitiatorsphotopolymerization

Autor:innen und Institutionen

  • Centre National de la Recherche Scientifique (CNRS), L'Institut de Science des Matériaux de Mulhouse (IS2M UMR 7361), Université de Haute-Alsace, F-68100 Mulhouse, France.
  • Université de Strasbourg, F-67081 Strasbourg, France.
  • Research School of Chemistry, Australian National University, Canberra, ACT 2601, Australia.

ORCID-Profile: Timur Borjigin, Michael Schmitt, Jacques Lalevée

Förderung

  • China Scholarship Council

Zitieren

APA

Liu, S., Borjigin, T., Schmitt, M., Morlet-Savary, F., Xiao, P., & Lalevée, J. (2023). High-Performance Photoinitiating Systems for LED-Induced Photopolymerization. Polymers, 15(2), 342. https://doi.org/10.3390/polym15020342

Vancouver

Liu S, Borjigin T, Schmitt M, Morlet-Savary F, Xiao P, Lalevée J. High-Performance Photoinitiating Systems for LED-Induced Photopolymerization. Polymers. 2023;15(2):342. doi:10.3390/polym15020342

BibTeX
@article{Liu2023,
  author = {Liu, Shaohui and Borjigin, Timur and Schmitt, Michael and Morlet-Savary, Fabrice and Xiao, Pu and Lalevée, Jacques},
  title = {High-Performance Photoinitiating Systems for LED-Induced Photopolymerization},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {2},
  pages = {342},
  doi = {10.3390/polym15020342}
}
Kostenlos starten →