EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Novel Low‐Cytotoxic and Highly Efficient Type I Photoinitiators for Visible LED‐/Sunlight‐Induced Photopolymerization and High‐Precision 3D Printing

Tong Gao, Zheng Liu, Jiansong Yin, Ji Feng, Céline Dietlin, Fabrice Morlet-Savary, Michael Schmitt, Tatiana Petithory, Laurent Pieuchot, Jing Zhang, Frédéric Dumur, Jacques Lalevée iD und 1 weitere

Angewandte Chemie International Edition · 25.04.2025 · 64 (18)

DOI: 10.1002/anie.202425598 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Angewandte Chemie International Edition, online erschienen am 26.02.2025. Verfasst von Tong Gao und 12 weiteren Autor:innen. Beteiligte Einrichtung: Université de Haute-Alsace, CNRS, IS2M UMR7361, F-68100, Mulhouse, France. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Scholarship Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of photoinitiators (PIs) combining high initiation ability, low‐toxicity, and availability for high‐precision 3D printing is a key challenge and an urgent problem to be solved nowadays in photopolymerization. In this study, carbazole chalcone glyoxylate oxime ester derivatives (denoted as Cs, C1−C5) containing both glyoxylate and oxime ester moieties with good light absorption properties in the visible range have been designed as type I PIs for the free radical photopolymerization (FRP) of trimethylolpropane triacrylate (TMPTA) and ethoxylated trimethylolpropane triacrylate (ETPTA) under 405 nm and 450 nm light‐emitting diodes (LEDs) as well as sunlight irradiation. The reaction properties and mechanism of Cs are firstly predicted by molecular modeling/molecular design, which anticipate that C5 could exhibit the best photoinitiation ability, this structure being more prone to decarboxylation. Subsequent experimental results clearly show that the photoinitiation ability of C5 outperforms that of the benchmark commercial PIs (methyl benzoylformate (MBF), diphenyl (2,4,6‐trimethylbenzoyl) phosphine oxide (TPO)), and phenylbis (2,4,6‐trimethylbenzoyl)‐phosphine oxide (BAPO) under the same conditions. Compared to TPO, the photoinitiation ability of C5 improved by 40 %, 132 %, and 47 % exposed to LED@405 nm, LED@450 nm, and sunlight. In addition, C5 is successfully applied to 3D printing for the manufacture of large‐scale and high‐resolution object. The photochemical mechanism of C5 is systematically and comprehensively analyzed using a combination of steady state photolysis, decarboxylation reaction, fluorescence experiments, and electron spin resonance‐spin trapping (ESR‐ST) technology. It is found that both glyoxylate and oxime ester in C5 are highly active and capable of undergoing decarboxylation reactions to produce CO 2 and free radicals, which is consistent with the results predicted by molecular modeling. Furthermore, the low‐toxicity of C5 is evidenced by cytotoxicity assays. The comprehensive molecular modeling and experimental approach adopted in this research has led to the development of novel PIs that are highly efficient and low‐toxic, and can be used for high‐precision 3D printing, which offers broad application prospects in the fields of environmental sustainability, visible light curing, and biomedical science.

Schlagwörter

Stichwörter der Autor:innen

3D printingLED blue lightfree radical polymerizationglyoxylate and oxime esterlow-cytotoxicmolecular modelingsunlighttype I photoinitiators

Autor:innen und Institutionen

  • Université de Haute-Alsace, CNRS, IS2M UMR7361, F-68100, Mulhouse, France.
  • Université de Strasbourg, Strasbourg, France.
  • Aix Marseille Univ, CNRS, ICR UMR 7273, F-13397, Marseille, France.
  • Future Industries Institute, University of South Australia, Mawson Lakes, SA 5095, Australia.
  • State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, 200050, P. R. China.

ORCID-Profile: Jacques Lalevée, Pu Xiao

Förderung

  • China Scholarship Council

Zitieren

APA

Gao, T., Liu, Z., Yin, J., Feng, J., Dietlin, C., Morlet-Savary, F., Schmitt, M., Petithory, T., Pieuchot, L., Zhang, J., Dumur, F., Lalevée, J., & Xiao, P. (2025). Novel Low‐Cytotoxic and Highly Efficient Type I Photoinitiators for Visible LED‐/Sunlight‐Induced Photopolymerization and High‐Precision 3D Printing. Angewandte Chemie International Edition, 64(18). https://doi.org/10.1002/anie.202425598

Vancouver

Gao T, Liu Z, Yin J, Feng J, Dietlin C, Morlet-Savary F, et al. Novel Low‐Cytotoxic and Highly Efficient Type I Photoinitiators for Visible LED‐/Sunlight‐Induced Photopolymerization and High‐Precision 3D Printing. Angewandte Chemie International Edition. 2025;64(18). doi:10.1002/anie.202425598

BibTeX
@article{Gao2025,
  author = {Gao, Tong and Liu, Zheng and Yin, Jiansong and Feng, Ji and Dietlin, Céline and Morlet-Savary, Fabrice and Schmitt, Michael and Petithory, Tatiana and Pieuchot, Laurent and Zhang, Jing and Dumur, Frédéric and Lalevée, Jacques and Xiao, Pu},
  title = {Novel Low‐Cytotoxic and Highly Efficient Type I Photoinitiators for Visible LED‐/Sunlight‐Induced Photopolymerization and High‐Precision 3D Printing},
  journal = {Angewandte Chemie International Edition},
  year = {2025},
  volume = {64},
  number = {18},
  doi = {10.1002/anie.202425598}
}
Kostenlos starten →