EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Quantifying the Roles of Yarn–Yarn Interfacial Stiffness and Friction in Load Transfer of Plain-Woven Kevlar 49 Fabrics

Xueyan Lv, Fuyong Qin, Xinmin Fan, Xin Tian

Photonics · 10.11.2026 · 13 (11) · 1063

DOI: 10.3390/photonics13111063 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Photonics, online erschienen am 10.11.2026. Verfasst von Xueyan Lv und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shandong Advanced Optoelectronic Chip Innovation and Entrepreneurship Community project, 2024 Weifang Science and Technology Development Plan Project, Shandong Province Key Research and Development Program (Science-and-Technology-based SMEs Innovation Capability Enhancement Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Micro-Raman spectroscopy offers an optical, non-contact route to stress metrology in fibrous materials: the Raman peak of aramid fiber shifts linearly with axial strain, so the spectral signal acquired at a laser-probed point directly reflects the local stress state. Here, Raman spectra of Kevlar 49 plain-woven fabrics were acquired with a 785 nm laser at 10 mW through a 10× objective over 1540–1650 cm−1, and the G′ band was tracked point by point along a drawn warp yarn to build spatially resolved stress profiles under drawing loads of 3–9 N and transverse preloads of 0 and 30 N. The optically measured profiles were inverted, through a two-zone friction–adhesion model, into interfacial shear parameters and a stress-transfer coefficient, and then analyzed via sensitivity analysis. The spectra show that transverse preload raises the effective sliding-friction shear stress by 57–78% and the maximum static interfacial shear stress by 60–75%. Sensitivity analysis shows that yarn–yarn interfacial stiffness governs the spatial decay of stress far more strongly than yarn elastic modulus, and defines a characteristic load transfer length. This spectral-shift-to-mechanics framework links optical measurements to interfacial design of high-performance fabrics.

Förderung

  • Shandong Advanced Optoelectronic Chip Innovation and Entrepreneurship Community project
  • 2024 Weifang Science and Technology Development Plan Project
  • Shandong Province Key Research and Development Program (Science-and-Technology-based SMEs Innovation Capability Enhancement Project

Zitieren

APA

Lv, X., Qin, F., Fan, X., & Tian, X. (2026). Quantifying the Roles of Yarn–Yarn Interfacial Stiffness and Friction in Load Transfer of Plain-Woven Kevlar 49 Fabrics. Photonics, 13(11), 1063. https://doi.org/10.3390/photonics13111063

Vancouver

Lv X, Qin F, Fan X, Tian X. Quantifying the Roles of Yarn–Yarn Interfacial Stiffness and Friction in Load Transfer of Plain-Woven Kevlar 49 Fabrics. Photonics. 2026;13(11):1063. doi:10.3390/photonics13111063

BibTeX
@article{Lv2026,
  author = {Lv, Xueyan and Qin, Fuyong and Fan, Xinmin and Tian, Xin},
  title = {Quantifying the Roles of Yarn–Yarn Interfacial Stiffness and Friction in Load Transfer of Plain-Woven Kevlar 49 Fabrics},
  journal = {Photonics},
  year = {2026},
  volume = {13},
  number = {11},
  pages = {1063},
  doi = {10.3390/photonics13111063}
}
Kostenlos starten →