EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D Printed Galilean Telescope for Low-Vision Patients

Daniel Aguirre-Aguirre, Itzel Muñoz-Juárez, Martin Isaías Rodríguez-Rodríguez, Brenda Villalobos-Mendoza, Ruth Eva Hernández-Carbajal, Rufino Díaz-Uribe, Rafael Izazaga-Pérez

Photonics · 15.08.2025 · 12 (8) · 815

DOI: 10.3390/photonics12080815 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Photonics, online erschienen am 15.08.2025. Verfasst von Daniel Aguirre-Aguirre und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: DGAPA-UNAM, SECIHTI.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Low vision is a condition in which a person experiences a significant loss of visual acuity or visual field that ordinary glasses, surgery, or medication cannot correct. Individuals suffering from this condition struggle to perform daily tasks, even when using glasses or contact lenses. In some cases, telescopes are recommended for patients with low vision diagnosis because they could help them improve their quality of life. Therefore, we propose a 3D-printed Galilean telescope for low-vision patients, accessible to both the vulnerable and nonvulnerable sectors of the population, with the advantages that the fabrication time, cost, and weight are considerably reduced. The performance of the 3D-printed Galilean telescope was evaluated by comparing it to an identical N-BK7 glass Galilean telescope design, obtaining a difference of 0.49 lp/mm in optical resolution. Clinical results from a patient with low vision, obtained as part of a proof-of-concept study, showed that the 3D-printed Galilean telescope improved the patient’s visual acuity, increasing it by up to 4 lines on the LEA numbers, from 10/80 to 10/32. Additionally, the 3D telescope enhanced the patient’s contrast sensitivity, improving it from 6 cpd (cycles per degree) level 8 to 18 cpd level 4.

Förderung

  • DGAPA-UNAM
  • SECIHTI

Zitieren

APA

Aguirre-Aguirre, D., Muñoz-Juárez, I., Rodríguez-Rodríguez, M. I., Villalobos-Mendoza, B., Hernández-Carbajal, R. E., Díaz-Uribe, R., & Izazaga-Pérez, R. (2025). 3D Printed Galilean Telescope for Low-Vision Patients. Photonics, 12(8), 815. https://doi.org/10.3390/photonics12080815

Vancouver

Aguirre-Aguirre D, Muñoz-Juárez I, Rodríguez-Rodríguez MI, Villalobos-Mendoza B, Hernández-Carbajal RE, Díaz-Uribe R, et al. 3D Printed Galilean Telescope for Low-Vision Patients. Photonics. 2025;12(8):815. doi:10.3390/photonics12080815

BibTeX
@article{AguirreAguirre2025,
  author = {Aguirre-Aguirre, Daniel and Muñoz-Juárez, Itzel and Rodríguez-Rodríguez, Martin Isaías and Villalobos-Mendoza, Brenda and Hernández-Carbajal, Ruth Eva and Díaz-Uribe, Rufino and Izazaga-Pérez, Rafael},
  title = {3D Printed Galilean Telescope for Low-Vision Patients},
  journal = {Photonics},
  year = {2025},
  volume = {12},
  number = {8},
  pages = {815},
  doi = {10.3390/photonics12080815}
}
Kostenlos starten →