Tailoring Immediate-Release Tablet Dissolution via Geometrically Tunable 3D-Printed Polymeric Coats
Pharmaceutics · 01.11.2026 · 18 (11) · 1400
DOI: 10.3390/pharmaceutics18111400 ↗Kurz gefasst
Fachartikel in der Zeitschrift Pharmaceutics, online erschienen am 01.11.2026. Verfasst von Rawan Fitaihi und 8 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ongoing Research Funding Program.
Abstract (Originalsprache)
Background/Objectives: Conventional modification of drug release often requires reformulation of the drug-containing dosage form. This study investigated fused deposition modelling (FDM) 3D-printed polymeric coats as external barriers for modifying the dissolution of intact immediate-release tablets without reformulating the drug-containing core.
Methods
Commercial tablets were encapsulated within 3D-printed polyvinyl alcohol (PVA) or polylactic acid (PLA) coats incorporating a continuous axial channel with surface apertures of 0, 4.5, or 9 mm diameter. Printing accuracy and dimensional fidelity were evaluated, followed by dissolution testing. Release profiles were characterized using zero-order, first-order, Higuchi, Weibull, and Korsmeyer–Peppas models.
Results
Printed coats showed high dimensional fidelity. Fully enclosed PVA coats produced a prolonged lag phase followed by rapid release associated with coat hydration and loss of structural integrity, whereas fully enclosed PLA coats showed no detectable drug release over 6 h. Increasing aperture diameter increased release from both polymers, although the magnitude and pattern of release differed markedly between PVA and PLA. At 2 h, PVA coats with 4.5 and 9 mm apertures released 89.5 ± 10.4% and 97.0 ± 15.6%, respectively, compared with 1.90 ± 0.13% and 58.8 ± 9.5% from the corresponding PLA designs. Korsmeyer–Peppas analysis indicated apparent anomalous release for PVA 4.5 mm (n = 0.647) and PLA 9 mm (n = 0.711), while PVA 9 mm exhibited Super Case-II-like behavior (n = 1.214).
Conclusions
FDM-printed external polymeric coats can substantially modify dissolution from intact immediate-release tablets. Release behavior depended on the interaction between aperture geometry and polymer properties, demonstrating the potential of external 3D-printed barriers as a flexible approach for tailoring drug-release profiles without reformulating the tablet core.
Förderung
- Ongoing Research Funding Program
Zitieren
APA
Fitaihi, R., Altalal, A., Altuwaijri, N., Alkathiri, F., Alzhrani, R. F., BinMuhanna, R. H., Soliman, N. M., Shalan, R. F., & Alfaraj, R. F. (2026). Tailoring Immediate-Release Tablet Dissolution via Geometrically Tunable 3D-Printed Polymeric Coats. Pharmaceutics, 18(11), 1400. https://doi.org/10.3390/pharmaceutics18111400
Vancouver
Fitaihi R, Altalal A, Altuwaijri N, Alkathiri F, Alzhrani RF, BinMuhanna RH, et al. Tailoring Immediate-Release Tablet Dissolution via Geometrically Tunable 3D-Printed Polymeric Coats. Pharmaceutics. 2026;18(11):1400. doi:10.3390/pharmaceutics18111400
BibTeX
@article{Fitaihi2026,
author = {Fitaihi, Rawan and Altalal, Alanoud and Altuwaijri, Njoud and Alkathiri, Fai and Alzhrani, Riyad F. and BinMuhanna, Reema H. and Soliman, Noha M. and Shalan, Reham F. and Alfaraj, Rihaf F.},
title = {Tailoring Immediate-Release Tablet Dissolution via Geometrically Tunable 3D-Printed Polymeric Coats},
journal = {Pharmaceutics},
year = {2026},
volume = {18},
number = {11},
pages = {1400},
doi = {10.3390/pharmaceutics18111400}
}
EUVIMED