EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Advances in Intranasal CNS Targeting: Integrating Formulations, Devices, Computational Fluid Dynamics, and 3D Printing

Lena Shaghlil iD, Yousef Al-Ebini iD, Mahmoud J Al Shawabkeh, Fatmawati Adam, Kuldeep K Saxena iD, Anas Alshishani iD, Wan Sharuzi Wan Harun iD

Pharmaceutics · 22.07.2026 · 18 (7) · 902

DOI: 10.3390/pharmaceutics18070902 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Pharmaceutics, online erschienen am 22.07.2026. Verfasst von Lena Shaghlil und 6 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical and Automotive Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah, Pekan 26600, Pahang, Malaysia. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 242 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundamental Research Grant Scheme, University Malaysia Pahang Al-Sultan Abdullah, Ministry of Higher Education, Malaysia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nose-to-brain (N2B) delivery is a practical, non-invasive strategy for CNS targeting that can increase brain exposure while limiting systemic exposure. This review integrates three milestones in N2B delivery, formulations, devices, and quantitative evaluation strategies, to define design rules for effective olfactory/trigeminal deposition and enhance translational relevance. Formulations emphasize mucoadhesive systems, nanoparticle carriers (polymeric, lipid-based, and hybrid), nano-emulsions, and stimuli-responsive “smart” gels that prolong nasal residence. Regarding device advancements, the review covers conventional nasal sprays optimized for plume geometry and droplet size. Furthermore, it examines breath-actuated metered sprays, which promote soft palate closure to route aerosols to superior regions, and vibrating mesh nebulizers capable of low-velocity mists for improved upper cavity deposition. Quantitative evaluation is discussed, including 3D-printed, anatomy-accurate nasal casts, high-speed spray diagnostics, and computational fluid dynamics (CFD). This review further links formulation and device parameters to regional deposition. Available clinical and animal data illustrate the feasibility of these approaches, safety considerations, and user-technique dependencies, while highlighting the need for standardized, anatomy-aware testing protocols. Together, these developments suggest that co-designed formulation device platforms, validated by cast/CFD metrics and supported by clinical imaging or pharmacokinetic data, can support N2B product development toward consistent, patient-relevant outcomes.

Schlagwörter

Stichwörter der Autor:innen

3D nasal castsmucoadhesive systemsnanoparticle carriersnasal devicesnasal spraynose-to-brainsmart polymers

Autor:innen und Institutionen

  • Faculty of Mechanical and Automotive Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah, Pekan 26600, Pahang, Malaysia.
  • Center for Research in Advanced Fluid & Processes, Universiti Malaysia Pahang Al-Sultan Abdullah, Kuantan 26300, Pahang, Malaysia.
  • Department of Cosmetic Science, Faculty of Allied Medical Sciences, Al-Ahliyya Amman University, Amman 19328, Jordan.
  • Department of Oral Surgery and Diagnostic Sciences, Applied Science Private University, Amman 11937, Jordan.
  • Faculty of Chemical and Process Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah, Kuantan 26300, Pahang, Malaysia.
  • Department of Mechanical Engineering, Bennett University, Greater Noida 201310, India.

ORCID-Profile: Lena Shaghlil, Yousef Al-Ebini, Kuldeep K Saxena, Anas Alshishani, Wan Sharuzi Wan Harun

Förderung

  • Fundamental Research Grant Scheme
  • University Malaysia Pahang Al-Sultan Abdullah
  • Ministry of Higher Education, Malaysia

Zitieren

APA

Shaghlil, L., Al-Ebini, Y., Shawabkeh, M. J. A., Adam, F., Saxena, K. K., Alshishani, A., & Wan Harun, W. S. (2026). Advances in Intranasal CNS Targeting: Integrating Formulations, Devices, Computational Fluid Dynamics, and 3D Printing. Pharmaceutics, 18(7), 902. https://doi.org/10.3390/pharmaceutics18070902

Vancouver

Shaghlil L, Al-Ebini Y, Shawabkeh MJA, Adam F, Saxena KK, Alshishani A, et al. Advances in Intranasal CNS Targeting: Integrating Formulations, Devices, Computational Fluid Dynamics, and 3D Printing. Pharmaceutics. 2026;18(7):902. doi:10.3390/pharmaceutics18070902

BibTeX
@article{Shaghlil2026,
  author = {Shaghlil, Lena and Al-Ebini, Yousef and Shawabkeh, Mahmoud J Al and Adam, Fatmawati and Saxena, Kuldeep K and Alshishani, Anas and Wan Harun, Wan Sharuzi},
  title = {Advances in Intranasal CNS Targeting: Integrating Formulations, Devices, Computational Fluid Dynamics, and 3D Printing},
  journal = {Pharmaceutics},
  year = {2026},
  volume = {18},
  number = {7},
  pages = {902},
  doi = {10.3390/pharmaceutics18070902}
}
Kostenlos starten →