Structural Designing of Supersonic Swirling Devices Based on Computational Fluid Dynamics Theory
Applied Sciences · 27.12.2024 · 15 (1) · 151
DOI: 10.3390/app15010151 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 27.12.2024. Verfasst von Qian Huang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Chongqing, China, Science and Technology Research Program of the Chongqing Municipal Education Commission.
Abstract (Originalsprache)
The supersonic swirling device is a new apparatus that can be used for natural-gas liquefaction. The structure of the supersonic swirling device has an important impact on the liquefaction efficiency. Therefore, this study presents a structural design method for supersonic cyclones based on CFD theory. Using the production parameters of a liquefied natural gas (LNG) peak-shaving station as the study case, a detailed design and design comparison of each part of the supersonic swirling separator are carried out. An optimum LNG supersonic swirling separator design was obtained. To ensure that the designed supersonic swirling separator achieved better liquefaction effectiveness, it was ascertained that no large shockwaves were generated in the de Laval nozzle, the pressure loss on the swirler was small, and the swirler was able to produce a large centripetal acceleration. The opening angle of the diffuser and the length of the straight tube were designed considering the location at which normal shockwaves were generated. The location at which shockwaves are generated and the friction effect are important parameters that determine the gap size. With this design guidance, the optimal structural dimensions of the supersonic swirling device for a given processing capacity were determined as follows: a swirler with six vanes and an 8 mm wide channel; a 10D-long straight tube, an opening angle of 20° between the straight tube and the divergent section, and a gap size of 2 mm. Compared with “Twister II”, the new device has better liquefaction efficiency.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Chongqing, China
- Science and Technology Research Program of the Chongqing Municipal Education Commission
Zitieren
APA
Huang, Q., Huang, H., Long, X., Tian, Y., & Meng, J. (2024). Structural Designing of Supersonic Swirling Devices Based on Computational Fluid Dynamics Theory. Applied Sciences, 15(1), 151. https://doi.org/10.3390/app15010151
Vancouver
Huang Q, Huang H, Long X, Tian Y, Meng J. Structural Designing of Supersonic Swirling Devices Based on Computational Fluid Dynamics Theory. Applied Sciences. 2024;15(1):151. doi:10.3390/app15010151
BibTeX
@article{Huang2024,
author = {Huang, Qian and Huang, Huirong and Long, Xueyuan and Tian, Yuan and Meng, Jiang},
title = {Structural Designing of Supersonic Swirling Devices Based on Computational Fluid Dynamics Theory},
journal = {Applied Sciences},
year = {2024},
volume = {15},
number = {1},
pages = {151},
doi = {10.3390/app15010151}
}
EUVIMED