EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparative Evaluation of Electronic Syringe and Pan Coating Techniques for Loading of FDM 3D Printed Tablets

Yusra Ahmed, Krisztián Kovács, Krisztina Ludasi, Orsolya Jójárt-Laczkovich iD, Tamás Sovány iD

Pharmaceuticals · 02.03.2026 · 19 (3) · 411

DOI: 10.3390/ph19030411 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Pharmaceuticals, online erschienen am 02.03.2026. Verfasst von Yusra Ahmed und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Pharmaceutical Technology and Regulatory Affairs, University of Szeged, Eötvös u 6, H-6720 Szeged, Hungary. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Szeged, University of Szeged OA Fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background/Objectives: 3D printing, particularly fused deposition modeling (FDM), is an emerging technology in pharmaceutical manufacturing, enabling the customization of dose or release rate to individual patient needs. However, finding the appropriate loading method to ensure the stability of the drug and achieve the targeted dose may be challenging. Furthermore, the drug utilization of most loading methods is poor, which results in considerable waste production and increased environmental burden. This study aimed to compare two post-printing drug-loading techniques: electronic syringe deposition and pan coating on FDM-printed polylactic acid (PLA) tablets. PLA is a biodegradable and biocompatible polymer that is widely used in this field due to its mechanical strength and regulatory approval.

Methods

Tablets with honeycomb-shaped infill (30% and 60% infill densities) were fabricated using PLA filaments, followed by loading with a 15% paracetamol solution via either electronic syringe deposition or pan coating. The resulting tablets were assessed for drug content, weight variation, friability%, surface morphology (SEM), drug distribution (Raman mapping), solid-state characteristics (DSC and FTIR), and dissolution performance.

Results

The results indicated that pan coating and electronic syringe deposition offered drug utilization up to 88% and 91.7%, respectively, which is superior to conventional soaking methods. Nevertheless, there is a significant difference in drug loading and release rate: pan coating yielded up to 10.14% drug loads and fast release (over 80% in 30 min), while electronic syringe deposition showed lower drug loading up to 4.8% and slower release (less than 80% within 60 min), which could be associated with better mechanical film integrity and higher precision. Both methods met USP standards with a weight loss of less than 1% and maintained the drug’s crystalline state and compatibility with PLA.

Conclusions

FDM combined with controlled post-printing drug loading presents a rapid, cost-effective, and flexible novel approach for manufacturing personalized immediate-release tablets, with pan coating potentially being more suitable for commercial scalability and electronic syringe offering precise dosing for personalized therapies.

Schlagwörter

Stichwörter der Autor:innen

electronic syringefused deposition modelingpan coatingparacetamolpolylactic acidpost-printing loading

Autor:innen und Institutionen

  • Institute of Pharmaceutical Technology and Regulatory Affairs, University of Szeged, Eötvös u 6, H-6720 Szeged, Hungary.
  • Department of Pharmaceutics, Sudan University of Science and Technology, Khartoum P.O. Box 407, Sudan.

ORCID-Profile: Orsolya Jójárt-Laczkovich, Tamás Sovány

Förderung

  • University of Szeged
  • University of Szeged OA Fund

Zitieren

APA

Ahmed, Y., Kovács, K., Ludasi, K., Jójárt-Laczkovich, O., & Sovány, T. (2026). Comparative Evaluation of Electronic Syringe and Pan Coating Techniques for Loading of FDM 3D Printed Tablets. Pharmaceuticals, 19(3), 411. https://doi.org/10.3390/ph19030411

Vancouver

Ahmed Y, Kovács K, Ludasi K, Jójárt-Laczkovich O, Sovány T. Comparative Evaluation of Electronic Syringe and Pan Coating Techniques for Loading of FDM 3D Printed Tablets. Pharmaceuticals. 2026;19(3):411. doi:10.3390/ph19030411

BibTeX
@article{Ahmed2026,
  author = {Ahmed, Yusra and Kovács, Krisztián and Ludasi, Krisztina and Jójárt-Laczkovich, Orsolya and Sovány, Tamás},
  title = {Comparative Evaluation of Electronic Syringe and Pan Coating Techniques for Loading of FDM 3D Printed Tablets},
  journal = {Pharmaceuticals},
  year = {2026},
  volume = {19},
  number = {3},
  pages = {411},
  doi = {10.3390/ph19030411}
}
Kostenlos starten →