EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Plasticizer-Driven Modulation of Processability and Performance in HME-Based Filaments and FDM 3D-Printed Tablets

Sangmin Lee, Hye Jin Park, Dong Wuk Kim

Journal of Composites Science · 24.01.2026 · 10 (2) · 61

DOI: 10.3390/jcs10020061 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 24.01.2026. Verfasst von Sangmin Lee und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Korea Basic Science Institute.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the effects of different types and ratios of plasticizers on the fabrication and properties of hot-melt-extruded filaments and fused deposition modeling (FDM) three-dimensional printed tablets containing theophylline (THEO). Polyethylene glycol (PEG) 1500 and stearic acid (SA) were used as plasticizers to prepare THEO-loaded filaments in a hydroxypropyl cellulose matrix via hot melt extrusion (HME), which were subsequently fabricated into tablets using an FDM 3D printer. The physicochemical properties of the filaments and printed tablets were evaluated using scanning electron microscopy, X-ray powder diffraction, and Fourier transform infrared spectroscopy. Drug release behavior was assessed using four tablet formulations (T1–T4) with different plasticizer types and ratios. All fabricated filaments exhibited sufficient hardness and flexibility for reliable 3D printing, and solid-state analyses confirmed partial molecular dispersion of THEO within the polymer matrix. In dissolution studies, PEG-containing formulations showed faster drug release than SA-based formulations, while all 3D-printed tablets achieved approximately 80% drug release within 6 h. Overall, this study demonstrates that the combined use of HME and FDM-based 3D printing, together with rational plasticizer selection, enables the development of personalized pharmaceutical tablets with tunable immediate and sustained drug release profiles.

Förderung

  • National Research Foundation of Korea
  • Korea Basic Science Institute

Zitieren

APA

Lee, S., Park, H. J., & Kim, D. W. (2026). Plasticizer-Driven Modulation of Processability and Performance in HME-Based Filaments and FDM 3D-Printed Tablets. Journal of Composites Science, 10(2), 61. https://doi.org/10.3390/jcs10020061

Vancouver

Lee S, Park HJ, Kim DW. Plasticizer-Driven Modulation of Processability and Performance in HME-Based Filaments and FDM 3D-Printed Tablets. Journal of Composites Science. 2026;10(2):61. doi:10.3390/jcs10020061

BibTeX
@article{Lee2026,
  author = {Lee, Sangmin and Park, Hye Jin and Kim, Dong Wuk},
  title = {Plasticizer-Driven Modulation of Processability and Performance in HME-Based Filaments and FDM 3D-Printed Tablets},
  journal = {Journal of Composites Science},
  year = {2026},
  volume = {10},
  number = {2},
  pages = {61},
  doi = {10.3390/jcs10020061}
}
Kostenlos starten →