Roll-to-Roll Gravure-Printed SWCNT Ring Oscillator for Flexible Microfluidic Ion Sensing
Nanomaterials · 24.05.2026 · 16 (11) · 660
DOI: 10.3390/nano16110660 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 24.05.2026. Verfasst von Junfeng Sun und 5 weiteren Autor:innen. Beteiligte Einrichtung: Research Center for Advanced Electronics Manufacturing, State Key Laboratory of Intelligent Manufacturing Equipment and Technology, School of Mechani…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Technology Innovation Program, Ministry of Trade, Industry & Energy.
Abstract (Originalsprache)
Rapid, accurate, and scalable ion sensing technologies are highly desirable for future flexible healthcare and lab-on-a-chip applications. Here, we present a fully roll-to-roll (R2R) gravure-printed single-walled carbon nanotube complementary ring oscillator (SWCNT-cRO)-based microfluidic ion sensing platform fabricated on a flexible substrate. The proposed platform combines scalable printed complementary electronics with frequency-based ion sensing via electrostatically induced top-gating in aqueous microfluidic environments. The fabricated SWCNT-cRO devices exhibited stable oscillation characteristics, with a high device yield (>80%) and continuous manufacturing capability at a web speed of 5.4 m/min. Printable ethanolamine/zirconium acetylacetonate-based n-doping technology enabled complementary SWCNT transistor operation, while multilayer CYTOP/FG-3650 encapsulation ensured stable electrical operation under ionic aqueous conditions. After integration into a polydimethylsiloxane-based microfluidic channel, the oscillation frequency of the SWCNT-cRO was systematically modulated by Na+ concentration and pH. The sensing mechanism was based on electrostatically induced carrier modulation in n-type SWCNT transistors, resulting in variations in propagation delay and corresponding shifts in oscillation frequency. Compared with conventional ion-sensitive transistor platforms, the proposed approach offers scalable manufacturing, non-contact ion sensing, elimination of external reference electrodes, and direct compatibility with digital frequency-signal processing systems. This work establishes a promising strategy for future low-cost, disposable, and flexible microfluidic sensing platforms for wearable healthcare and lab-on-a-chip applications, ion sensing, and thin-film transistors.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Research Center for Advanced Electronics Manufacturing, State Key Laboratory of Intelligent Manufacturing Equipment and Technology, School of Mechanical Science and Engineering, Huazhong University of Science and Techno…
- Research Engineering Center for R2R Printed Flexible Computer, Sungkyunkwan University, Suwon-si 16419, Republic of Korea.
- Department of Biophysics, Institute of Quantum Biophysics, Sungkyunkwan University, Suwon-si 16419, Republic of Korea.
ORCID-Profile: Junfeng Sun, Jinhwa Park, Sajjan Parajuli, Younsu Jung
Förderung
- National Research Foundation of Korea
- Technology Innovation Program
- Ministry of Trade, Industry & Energy
Zitieren
APA
Sun, J., Park, H., Park, J., Shrestha, S., Parajuli, S., & Jung, Y. (2026). Roll-to-Roll Gravure-Printed SWCNT Ring Oscillator for Flexible Microfluidic Ion Sensing. Nanomaterials, 16(11), 660. https://doi.org/10.3390/nano16110660
Vancouver
Sun J, Park H, Park J, Shrestha S, Parajuli S, Jung Y. Roll-to-Roll Gravure-Printed SWCNT Ring Oscillator for Flexible Microfluidic Ion Sensing. Nanomaterials. 2026;16(11):660. doi:10.3390/nano16110660
BibTeX
@article{Sun2026,
author = {Sun, Junfeng and Park, Hyejin and Park, Jinhwa and Shrestha, Sagar and Parajuli, Sajjan and Jung, Younsu},
title = {Roll-to-Roll Gravure-Printed SWCNT Ring Oscillator for Flexible Microfluidic Ion Sensing},
journal = {Nanomaterials},
year = {2026},
volume = {16},
number = {11},
pages = {660},
doi = {10.3390/nano16110660}
}
EUVIMED