EUVIMEDEUVIMED entdecken
Crossref

High Cell to Module Efficiency Remaining Ratio of ≈90% for the 100 cm 2 Fully Roll‐to‐Roll Gravure Printed Flexible Organic Solar Cells From Non‐Halogenated Solvent

Shutao Yang, Xingze Chen, Yaqin Pan, Jin Fang, Yunfei Han, Zhenguo Wang, Fan Qian, Weitao Qi, Ke Shui, Qing Zhang, Fengqi Guo, Yanming Sun und 2 weitere

Advanced Materials · 2025-04 · 37 (17)

DOI: 10.1002/adma.202500115 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 17.03.2025. Verfasst von Shutao Yang und 13 weiteren Autor:innen. Beteiligte Einrichtung: Henan Institutes of Advanced Technology, Zhengzhou University, Zhengzhou, 450052, P. R. China. Die Arbeit wurde bisher 43-mal zitiert (Crossref) und nennt 91 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Vacuum Interconnected Nanotech Workstation, Suzhou Institute of Nano-Tech and Nano-Bionics, "Dual Carbon" Science and Technology Innovation of Jiangsu province (Industrial Prospect and Key Technology Research program).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The cell‐to‐module (CTM) efficiency remaining ratio from monolithic device to large‐area module indicates the scalability potential for large‐area organic solar cells (OSCs). Nowadays, the CTM value is still low as the area increases to larger than 100 cm 2 . In this work, the crucial role of solvent in CTM for printing, which on one side influenced the large area homogeneity due to the ink rheology property, and on the other side impacted phase separation dynamics because of vaporization and crystalline rate is highlighted. The films from TMB show excessive pure phase and printing line defects in vertical the printing direction due to slow volatilization speed and low adhesion, while Tol‐based films present printing line defects along the printing direction due to large surface adhesion are demonstrated. In contrast, the films from non‐halogenated solvent, o‐XY exhibited a suitable phase separation size and excellent large‐area homogeneity. Consequently, the fully printed 1 cm 2 FOSCs exhibit an efficiency of 14.81%. Moreover, the FOSCs module with an area of 28–104 cm 2 gives an efficiency of over 13%, with a CTM of 0.9. Selecting suitable non‐halogenated solvents to achieve large‐area uniformity and appropriate phase separation morphology in >100 cm 2 modules is of great importance for the industrialization of FOSCs.

Schlagwörter

Stichwörter der Autor:innen

R2R printingflexible organic solar cellsmodulesphase separationrheology properties

Autor:innen und Institutionen

  • Henan Institutes of Advanced Technology, Zhengzhou University, Zhengzhou, 450052, P. R. China.
  • i-Lab & Printable Electronics Research Center, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences (CAS), Suzhou, 215123, P. R. China.
  • Vacuum Interconnected Nanotech Workstation (Nano-X), Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences (CAS), Suzhou, 215123, P. R. China.
  • School of Chemistry, Beihang University, Beijing, 100191, P. R. China.
  • School of Nano-Tech and Nano-Bionics, University of Science and Technology of China, Hefei, 230027, P. R. China.

ORCID-Profile: Qun Luo

Förderung

  • National Natural Science Foundation of China
  • Vacuum Interconnected Nanotech Workstation, Suzhou Institute of Nano-Tech and Nano-Bionics
  • "Dual Carbon" Science and Technology Innovation of Jiangsu province (Industrial Prospect and Key Technology Research program)

Zitieren

APA

Yang, S., Chen, X., Pan, Y., Fang, J., Han, Y., Wang, Z., Qian, F., Qi, W., Shui, K., Zhang, Q., Guo, F., Sun, Y., Ma, C. Q., & Luo, Q. (2025). High Cell to Module Efficiency Remaining Ratio of ≈90% for the 100 cm 2 Fully Roll‐to‐Roll Gravure Printed Flexible Organic Solar Cells From Non‐Halogenated Solvent. Advanced Materials, 37(17). https://doi.org/10.1002/adma.202500115

Vancouver

Yang S, Chen X, Pan Y, Fang J, Han Y, Wang Z, et al. High Cell to Module Efficiency Remaining Ratio of ≈90% for the 100 cm 2 Fully Roll‐to‐Roll Gravure Printed Flexible Organic Solar Cells From Non‐Halogenated Solvent. Advanced Materials. 2025;37(17). doi:10.1002/adma.202500115

BibTeX
@article{Yang2025,
  author = {Yang, Shutao and Chen, Xingze and Pan, Yaqin and Fang, Jin and Han, Yunfei and Wang, Zhenguo and Qian, Fan and Qi, Weitao and Shui, Ke and Zhang, Qing and Guo, Fengqi and Sun, Yanming and Ma, Chang-Qi and Luo, Qun},
  title = {High Cell to Module Efficiency Remaining Ratio of ≈90% for the 100 cm 2 Fully Roll‐to‐Roll Gravure Printed Flexible Organic Solar Cells From Non‐Halogenated Solvent},
  journal = {Advanced Materials},
  year = {2025},
  volume = {37},
  number = {17},
  doi = {10.1002/adma.202500115}
}
Kostenlos starten →