Surface Quality Enhancement of SLM-Fabricated Ti-6Al-4V via Top-Hat Laser Polishing: Melt Pool Dynamics and Microstructural Evolution
Nanomaterials · 22.04.2026 · 16 (9) · 505
DOI: 10.3390/nano16090505 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 22.04.2026. Verfasst von Yingwei Kuang und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Intelligent Manufacturing and Equipment, Shenzhen University of Information Technology, Shenzhen 518172, China. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shenzhen Science and Technology Program, Scientific Research Project of General Universities in Guangdong Province, SZIIT School-level research projects.
Abstract (Originalsprache)
Ti-6Al-4V parts fabricated via selective laser melting (SLM) often exhibit severe surface irregularities that limit their direct engineering application. This study proposes a top-hat beam laser polishing method to improve surface quality. The results show that surface roughness (Sa) is reduced to 0.48 μm, a 95.3% decrease from the as-built condition. The uniform energy distribution of the top-hat beam stabilizes melt pool behavior, enabling effective surface leveling through valley filling and lateral melt flow. In contrast, Gaussian beam polishing induces strong Marangoni convection and wake effects, resulting in higher residual roughness. Microstructural analysis indicates an increased fraction of equiaxed α grains and a β-phase content of ~6% after top-hat polishing. The heat-affected zone likely exhibits a subcritical heat-treatment-like effect, promoting fine secondary α precipitation. Additionally, localized stresses induced by steep thermal gradients during SLM are effectively relieved. Overall, top-hat laser polishing is a promising post-processing technique for enhancing the surface quality of Ti-6Al-4V components.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Intelligent Manufacturing and Equipment, Shenzhen University of Information Technology, Shenzhen 518172, China.
- School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510641, China.
- Han's Laser Technology Industry Group Co., Ltd., Shenzhen 518052, China.
ORCID-Profile: Haibing Xiao
Förderung
- Shenzhen Science and Technology Program
- Scientific Research Project of General Universities in Guangdong Province
- SZIIT School-level research projects
- National Key Technology Research and Development Program
- National Natural Science Foundation of China
Zitieren
APA
Kuang, Y., Liu, M., Xiao, H., Wang, Z., Luo, B., Xu, X., & Gu, S. (2026). Surface Quality Enhancement of SLM-Fabricated Ti-6Al-4V via Top-Hat Laser Polishing: Melt Pool Dynamics and Microstructural Evolution. Nanomaterials, 16(9), 505. https://doi.org/10.3390/nano16090505
Vancouver
Kuang Y, Liu M, Xiao H, Wang Z, Luo B, Xu X, et al. Surface Quality Enhancement of SLM-Fabricated Ti-6Al-4V via Top-Hat Laser Polishing: Melt Pool Dynamics and Microstructural Evolution. Nanomaterials. 2026;16(9):505. doi:10.3390/nano16090505
BibTeX
@article{Kuang2026,
author = {Kuang, Yingwei and Liu, Mingjun and Xiao, Haibing and Wang, Zhenmin and Luo, Bowie and Xu, Xiaomei and Gu, Shun},
title = {Surface Quality Enhancement of SLM-Fabricated Ti-6Al-4V via Top-Hat Laser Polishing: Melt Pool Dynamics and Microstructural Evolution},
journal = {Nanomaterials},
year = {2026},
volume = {16},
number = {9},
pages = {505},
doi = {10.3390/nano16090505}
}
EUVIMED