EUVIMEDEUVIMED entdecken
Crossref

Ti-6Al-4V alloy printing — correlations between experimental and numerical modelling melt pool data

Axieh Joy I. Bagasol, Gowthaman Parivendhan, Alojz Ivankovic, Denis P. Dowling

The International Journal of Advanced Manufacturing Technology · 2024-08 · 133 (7-8) · 3603-3617

DOI: 10.1007/s00170-024-13979-w ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 15.06.2024. Verfasst von Axieh Joy I. Bagasol und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 66 Literaturangaben. Gefördert von: Science Foundation Ireland.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the influence of processing parameters, specifically laser power and scan speed, on the melt pool characteristics of Ti-6Al-4V alloy during Powder Bed Fusion–Laser Beam (PBF-LB) printing. The objective is to provide a deeper understanding of the melt pool based on in-process melt pool monitoring data obtained from a production scale PBF-LB system (RenAM 500 S), experimental melt pool characterisation from single line print studies, and numerical modelling studies using Computational Fluid Dynamics (CFD). The findings demonstrate that laser power has a more pronounced effect on melt pool depth compared to scan speed, for a given line scan energy. This is due to an increased dwell time at elevated temperatures and reduced local cooling rates. A direct correlation is established between melt pool depth, increased emission intensity from in situ monitoring system, and the temperature-time profile derived from numerical modelling. Additionally, melt pool fluid flow based on numerical modelling reveals the presence of intense thermocapillary flow at higher laser power conditions, leading to the retention of porosity along the track. This observation was supported through experimental validation, as evidenced by the increased levels of porosity observed in line scan samples printed at higher laser powers.

Förderung

  • Science Foundation Ireland

Zitieren

APA

Bagasol, A. J. I., Parivendhan, G., Ivankovic, A., & Dowling, D. P. (2024). Ti-6Al-4V alloy printing — correlations between experimental and numerical modelling melt pool data. The International Journal of Advanced Manufacturing Technology, 133(7-8), 3603-3617. https://doi.org/10.1007/s00170-024-13979-w

Vancouver

Bagasol AJI, Parivendhan G, Ivankovic A, Dowling DP. Ti-6Al-4V alloy printing — correlations between experimental and numerical modelling melt pool data. The International Journal of Advanced Manufacturing Technology. 2024;133(7-8):3603-3617. doi:10.1007/s00170-024-13979-w

BibTeX
@article{Bagasol2024,
  author = {Bagasol, Axieh Joy I. and Parivendhan, Gowthaman and Ivankovic, Alojz and Dowling, Denis P.},
  title = {Ti-6Al-4V alloy printing — correlations between experimental and numerical modelling melt pool data},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2024},
  volume = {133},
  number = {7-8},
  pages = {3603--3617},
  doi = {10.1007/s00170-024-13979-w}
}
Kostenlos starten →