EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Analytical Modeling Study on the Thermal Behavior of Copper–Carbon Nanotube Composite Through-Silicon Via (TSV)

Kai Ying, Jie Liang iD

Nanomaterials · 21.03.2026 · 16 (6) · 377

DOI: 10.3390/nano16060377 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 21.03.2026. Verfasst von Kai Ying und 1 weiteren Autor:innen. Beteiligte Einrichtung: The School of Micro Electronics, Shanghai University, Shanghai 201800, China. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the Monte Carlo (MC) method is employed to generate the diameter and relative positional distributions of carbon nanotubes (CNTs). Based on this, we develop a three-layer thermal model for a copper-carbon nanotube (Cu-CNT) through-silicon via (TSV). By integrating Gauss–Hermite quadrature with the Law of Large Numbers (LLN), an analytical expression for thermal conductivity is derived, enabling efficient and accurate estimation of the thermal conductivity of Cu-CNT-filled TSV. Contrary to expectations, the thermal conductivity of TSV does not increase significantly with CNT volume fraction, primarily due to the interfacial thermal resistance at Cu-CNT and CNT-CNT junctions. Through calibration against previously reported experimental data, the effective Cu-CNT interfacial thermal resistance is estimated to be on the order of 10−7 m2K/W. Comparison with previously reported effective thermal conductivity data of Cu-CNT composites shows that the model maintains an error below 2% when the CNT volume fraction is below 10%. The model is therefore most suitable for low CNT volume fractions, where the assumed spatial distribution and structural simplifications remain physically valid. Furthermore, this study investigates the influence of TSV length on thermal performance, predicts the variation in thermal conductivity of Cu-CNT composites under different volume fractions, and the extracted thermal conductivity values are further used as material inputs for device-level electro-thermal COMSOL 6.1 simulations.

Schlagwörter

Stichwörter der Autor:innen

analytical modelcopper–CNT (Cu-CNT) compositethermal conductivitythrough-silicon via (TSV)

Autor:innen und Institutionen

  • The School of Micro Electronics, Shanghai University, Shanghai 201800, China.

ORCID-Profile: Jie Liang

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Ying, K., & Liang, J. (2026). An Analytical Modeling Study on the Thermal Behavior of Copper–Carbon Nanotube Composite Through-Silicon Via (TSV). Nanomaterials, 16(6), 377. https://doi.org/10.3390/nano16060377

Vancouver

Ying K, Liang J. An Analytical Modeling Study on the Thermal Behavior of Copper–Carbon Nanotube Composite Through-Silicon Via (TSV). Nanomaterials. 2026;16(6):377. doi:10.3390/nano16060377

BibTeX
@article{Ying2026,
  author = {Ying, Kai and Liang, Jie},
  title = {An Analytical Modeling Study on the Thermal Behavior of Copper–Carbon Nanotube Composite Through-Silicon Via (TSV)},
  journal = {Nanomaterials},
  year = {2026},
  volume = {16},
  number = {6},
  pages = {377},
  doi = {10.3390/nano16060377}
}
Kostenlos starten →