EUVIMEDEUVIMED entdecken
QuerschnittstudieOpen Access · CC BY 4.0

Statistically Equivalent Representative Volume Element Modeling of Carbon Nanotube–Copper Composite Fibers Based on Cross-Sectional Microstructures

Hyder Mukhtar Saif Bukhari, Nuo Xu, Jae Won Kim, Hyunwoo Kim, Young-Kwan Kim, Yeonsu Jung, Leslie K. Hwang, Beomjin Kwon

Journal of Engineering Materials and Technology · 01.10.2026 · 148 (4)

DOI: 10.1115/1.4072268 ↗

Kurz gefasst

Querschnittstudie in der Zeitschrift Journal of Engineering Materials and Technology, online erschienen am 05.08.2026. Verfasst von Hyder Mukhtar Saif Bukhari und 7 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon nanotube (CNT) fibers coated with metals represent a promising class of multifunctional materials that combine enhanced mechanical strength with high electrical conductivity. In this study, we develop a computational framework for porous CNT fibers and metal-coated CNT fibers by integrating statistically equivalent representative volume element (SERVE) models with finite element methods. The SERVE framework generates synthetic cross-sectional microstructures that reproduce key statistical descriptors extracted from microscopy images, enabling representative simulations. For short fiber models where axial variation is assumed negligible, the synthetic cross-sectional microstructures are uniformly extended along the fiber axis. Then, the tensile response of pristine CNT fibers and copper (Cu)/CNT fibers is numerically evaluated as a function of packing density and copper volume fraction, assuming a porosity-induced necking failure mechanism. For pristine CNT fibers, tensile strength increases with packing density, whereas for Cu/CNT fibers, tensile strength is strongly dependent on microstructural morphology. Among the configurations studied, Cu/CNT fibers featuring a high-packing-density CNT core encapsulated by a copper shell exhibit the highest performance index, indicating the most favorable balance between tensile strength and electrical conductivity. Although the SERVE approach is demonstrated using cross-sectional microstructures without accounting for axial structural variations, it establishes a framework for modeling stochastically porous Cu/CNT fiber microstructures that can be extended to fully three-dimensional analyses in future work.

Förderung

  • National Research Foundation of Korea

Zitieren

APA

Bukhari, H. M. S., Xu, N., Kim, J. W., Kim, H., Kim, Y., Jung, Y., Hwang, L. K., & Kwon, B. (2026). Statistically Equivalent Representative Volume Element Modeling of Carbon Nanotube–Copper Composite Fibers Based on Cross-Sectional Microstructures. Journal of Engineering Materials and Technology, 148(4). https://doi.org/10.1115/1.4072268

Vancouver

Bukhari HMS, Xu N, Kim JW, Kim H, Kim Y, Jung Y, et al. Statistically Equivalent Representative Volume Element Modeling of Carbon Nanotube–Copper Composite Fibers Based on Cross-Sectional Microstructures. Journal of Engineering Materials and Technology. 2026;148(4). doi:10.1115/1.4072268

BibTeX
@article{Bukhari2026,
  author = {Bukhari, Hyder Mukhtar Saif and Xu, Nuo and Kim, Jae Won and Kim, Hyunwoo and Kim, Young-Kwan and Jung, Yeonsu and Hwang, Leslie K. and Kwon, Beomjin},
  title = {Statistically Equivalent Representative Volume Element Modeling of Carbon Nanotube–Copper Composite Fibers Based on Cross-Sectional Microstructures},
  journal = {Journal of Engineering Materials and Technology},
  year = {2026},
  volume = {148},
  number = {4},
  doi = {10.1115/1.4072268}
}
Kostenlos starten →