EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Improving Fabrication and Performance of Porous Silicon Electron Emission Devices via Functional Layer Resistivity Modulation

Jinxin Dong, Xiaojing Huyan, Fangzhou Luo, Guanyang Zhang, Qiang Liu, Yawen Li, Tianbao Hu, Yongxun Liu, Shinan Wang iD, Wenjie Yu

Nanomaterials · 09.03.2026 · 16 (5) · 337

DOI: 10.3390/nano16050337 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 09.03.2026. Verfasst von Jinxin Dong und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Microelectronics, Shanghai University, Shanghai 201800, China. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To improve the process controllability and fabrication uniformity of porous silicon (PS)-based electron emission devices (EEDs), we employed an epitaxial (epi) silicon film as the functional layer, leveraging its advantages of high crystalline quality and flexibility of resistivity modulation regardless of the substrate. Precise modulation of the epi film resistivity was achieved via ion implantation. We investigated the effects of resistivity modulation on the fabrication process and device performance. This scheme enabled the formation of PS through electrochemical etching without illumination, and therefore etch self-termination. As a direct result, the etching uniformity in both the vertical and horizontal directions is enhanced. It then facilitated the optimization of the oxidation of the PS surface, which is essential for EED performance. The devices exhibited a maximum electron emission current density (Je) of 80 μA/cm2 with high stability. Driven under DC mode at a bias voltage (Vps) of 23 V, Je decreased temporarily to 28 μA/cm2 after 4 h of continuous operation. This study provides a new feasible approach for research on PS EEDs.

Schlagwörter

Stichwörter der Autor:innen

electron emission deviceepi filmion implantationporous siliconresistivity modulation

Autor:innen und Institutionen

  • School of Microelectronics, Shanghai University, Shanghai 201800, China.
  • Shanghai Institute of IC Materials Co., Ltd., Shanghai 201800, China.
  • Shanghai Industrial μTechnology Research Institute, Shanghai 201800, China.
  • State Key Laboratory of Materials for Integrated Circuits, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China.

ORCID-Profile: Shinan Wang

Zitieren

APA

Dong, J., Huyan, X., Luo, F., Zhang, G., Liu, Q., Li, Y., Hu, T., Liu, Y., Wang, S., & Yu, W. (2026). Improving Fabrication and Performance of Porous Silicon Electron Emission Devices via Functional Layer Resistivity Modulation. Nanomaterials, 16(5), 337. https://doi.org/10.3390/nano16050337

Vancouver

Dong J, Huyan X, Luo F, Zhang G, Liu Q, Li Y, et al. Improving Fabrication and Performance of Porous Silicon Electron Emission Devices via Functional Layer Resistivity Modulation. Nanomaterials. 2026;16(5):337. doi:10.3390/nano16050337

BibTeX
@article{Dong2026,
  author = {Dong, Jinxin and Huyan, Xiaojing and Luo, Fangzhou and Zhang, Guanyang and Liu, Qiang and Li, Yawen and Hu, Tianbao and Liu, Yongxun and Wang, Shinan and Yu, Wenjie},
  title = {Improving Fabrication and Performance of Porous Silicon Electron Emission Devices via Functional Layer Resistivity Modulation},
  journal = {Nanomaterials},
  year = {2026},
  volume = {16},
  number = {5},
  pages = {337},
  doi = {10.3390/nano16050337}
}
Kostenlos starten →