EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimal Methylammounium Chloride Additive for High-Performance Perovskite Solar Cells

Qinghua Cao, Hui Liu, Jiangping Xing, Bing'e Li, Chuangping Liu, Fobao Xie, Xiaoli Zhang iD, Weiren Zhao

Nanomaterials · 14.02.2025 · 15 (4) · 292

DOI: 10.3390/nano15040292 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 14.02.2025. Verfasst von Qinghua Cao und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Physics and Opto-Electronic Engineering, Guangdong Provincial Key Laboratory of Sensing Physics and System Integration Applications, Guangd…. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: 2024 Shanwei Talent Revitalization Plan for New Generation Electronic Information Industry.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Organic–inorganic lead halide perovskite solar cells (PSCs) have presented promising improvements within recent years due to the superior photophysical properties of perovskites. The efficiency of PSCs is closely related to the quality of the of the perovskite film. Additive engineering is an effective strategy to regulate the crystallization of perovskite film. Therefore, in this work, we introduce methylammounium chloride (MACl) into a perovskite precursor as an additive to improve the crystallization of perovskite film and to suppress the formation of defects to achieve high-performance PSCs. By meticulously investigating and studying the influence of different percentages of MACl additives on perovskite film quality, we obtain that the best amount of incorporated MACl is 10%. Thanks the employment of the optimal amount of MACl, the perovskite film shows a significantly improved morphology with larger grains, a smoother surface, and suppressed defects. Finally, the target PSCs with the addition of 10% MACl present the highest PCE of 23.61%, which is much higher than the value (16.72%) of the control device.

Schlagwörter

Stichwörter der Autor:innen

MACl additivehigh-performance PSCsperovskite film quality

Autor:innen und Institutionen

  • School of Physics and Opto-Electronic Engineering, Guangdong Provincial Key Laboratory of Sensing Physics and System Integration Applications, Guangdong University of Technology, Guangzhou 510006, China.
  • Shanwei-GDUT Collaborative Research Institute for Innovation Industrial Technology, Shanwei 730010, China.

ORCID-Profile: Xiaoli Zhang

Förderung

  • 2024 Shanwei Talent Revitalization Plan for New Generation Electronic Information Industry

Zitieren

APA

Cao, Q., Liu, H., Xing, J., Li, B., Liu, C., Xie, F., Zhang, X., & Zhao, W. (2025). Optimal Methylammounium Chloride Additive for High-Performance Perovskite Solar Cells. Nanomaterials, 15(4), 292. https://doi.org/10.3390/nano15040292

Vancouver

Cao Q, Liu H, Xing J, Li B, Liu C, Xie F, et al. Optimal Methylammounium Chloride Additive for High-Performance Perovskite Solar Cells. Nanomaterials. 2025;15(4):292. doi:10.3390/nano15040292

BibTeX
@article{Cao2025,
  author = {Cao, Qinghua and Liu, Hui and Xing, Jiangping and Li, Bing'e and Liu, Chuangping and Xie, Fobao and Zhang, Xiaoli and Zhao, Weiren},
  title = {Optimal Methylammounium Chloride Additive for High-Performance Perovskite Solar Cells},
  journal = {Nanomaterials},
  year = {2025},
  volume = {15},
  number = {4},
  pages = {292},
  doi = {10.3390/nano15040292}
}
Kostenlos starten →