EUVIMEDEUVIMED entdecken
Crossref

All‐in‐One Additive‐Modulated Phase Transition for High‐Performance Perovskite Solar Cells

Shuang Gao, YuAng Liu, Dehan Li, Xinyu Li, TianAo Hou, Yuchen Li, Rongyao Lv, Yuan Li, Tao Chen, Junfa Zhu, Shuang Chen, Zhimin Fang und 1 weitere

Advanced Functional Materials · 13.11.2026

DOI: 10.1002/adfm.79594 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 13.11.2026. Verfasst von Shuang Gao und 12 weiteren Autor:innen. Die Arbeit nennt 66 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities, Basic Research Program of Jiangsu Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

FAPbI 3 perovskite with an ideal bandgap is a promising candidate for high‐efficiency solar cells. However, its polymorphic phase transitions during crystallization often lead to inferior crystallinity, poor morphological uniformity, and high trap density. Herein, we introduce an all‐in‐one additive, 2,3,4,5,6‐pentafluorobenzamide (PFBA), into the perovskite precursor to modulate the phase transition process, achieving favorable grain management for n‐i‐p perovskite solar cells (PSCs). PFBA outcompetes polar solvent molecules through simultaneous strong coordination interactions with the [PbI 6 ] 4− octahedron and hydrogen bonding with the FAI in the perovskite precursor, suppressing solvent intermediate phases and inducing a PFBA‐anchored δ‐phase. During annealing, PFBA delays the formation of the α‐phase and prolongs crystal growth. This regulated phase transition process produces high‐quality α‐FAPbI 3 films with large, densely packed grains, enhanced crystallographic orientation, and an altered residual stress distribution. These lead to significantly increased carrier lifetime, reduced trap density, and enhanced structural stability. Consequently, the PFBA‐based PSCs deliver a higher efficiency of 26.19% for 0.089 cm 2 devices and 25.46% for 1 cm 2 devices, compared to 24.57% and 23.32% for the controls, respectively. Meanwhile, the target devices demonstrate improved stability, retaining 94.1% of the initial efficiency after 1000 h of continuous illumination, outperforming the control devices, which retain only 80.2%.

Förderung

  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities
  • Basic Research Program of Jiangsu Province

Zitieren

APA

Gao, S., Liu, Y., Li, D., Li, X., Hou, T., Li, Y., Lv, R., Li, Y., Chen, T., Zhu, J., Chen, S., Fang, Z., & Yang, S. (2026). All‐in‐One Additive‐Modulated Phase Transition for High‐Performance Perovskite Solar Cells. Advanced Functional Materials. https://doi.org/10.1002/adfm.79594

Vancouver

Gao S, Liu Y, Li D, Li X, Hou T, Li Y, et al. All‐in‐One Additive‐Modulated Phase Transition for High‐Performance Perovskite Solar Cells. Advanced Functional Materials. 2026. doi:10.1002/adfm.79594

BibTeX
@article{Gao2026,
  author = {Gao, Shuang and Liu, YuAng and Li, Dehan and Li, Xinyu and Hou, TianAo and Li, Yuchen and Lv, Rongyao and Li, Yuan and Chen, Tao and Zhu, Junfa and Chen, Shuang and Fang, Zhimin and Yang, Shangfeng},
  title = {All‐in‐One Additive‐Modulated Phase Transition for High‐Performance Perovskite Solar Cells},
  journal = {Advanced Functional Materials},
  year = {2026},
  doi = {10.1002/adfm.79594}
}
Kostenlos starten →