Significance of the Powder Metallurgy Approach and Its Processing Parameters on the Mechanical Behavior of Magnesium-Based Materials
Nanomaterials · 09.01.2025 · 15 (2) · 92
DOI: 10.3390/nano15020092 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Nanomaterials, online erschienen am 09.01.2025. Verfasst von Sachin Kumar Sharma und 6 weiteren Autor:innen. Beteiligte Einrichtung: Surface Science and Tribology Lab, Department of Mechanical Engineering, Shiv Nadar Institute of Eminence, Gautam Buddha Nagar 201314, India. Die Arbeit wurde bisher 39-mal zitiert (Crossref) und nennt 216 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Magnesium-based materials, which are known for their light weight and exceptional strength-to-weight ratio, hold immense promise in the biomedical, automotive, aerospace, and military sectors. However, their inherent limitations, including low wear resistance and poor mechanical properties, have driven the development of magnesium-based metal matrix composites (Mg-MMCs). The pivotal role of powder metallurgy (PM) in fabricating Mg-MMCs was explored, enhancing their mechanical and corrosion resistance characteristics. The mechanical characteristics depend upon the fabrication methodology, composition, processing technique, and reinforcement added to the magnesium. PM is identified as the most efficient due to its ability to produce near-net shape composites with high precision, cost-effectiveness, and minimal waste. Furthermore, PM enables precise control over critical processing parameters, such as compaction pressure, sintering temperature, and particle size, which directly influence the composite’s microstructure and properties. This study highlights various reinforcements, mainly carbon nanotubes (CNTs), graphene nanoparticles (GNPs), silicon carbide (SiC), and hydroxyapatite (HAp), and their effects on improving wear, corrosion resistance, and mechanical strength. Among these, CNTs emerge as a standout reinforcement due to their ability to enhance multiple properties when used at optimal weight fractions. Further, this study delves into the interaction between reinforcement types and matrix materials, emphasizing the importance of uniform dispersion in preventing porosity and improving durability. Optimal PM conditions, such as a compaction pressure of 450 MPa, sintering temperatures between 550 and 600 °C, and sintering times of 2 h, are recommended for achieving superior mechanical performance. Emerging trends in reinforcement materials, including nanostructures and bioactive particles, are also discussed, underscoring their potential to widen the application spectrum of Mg-MMCs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Surface Science and Tribology Lab, Department of Mechanical Engineering, Shiv Nadar Institute of Eminence, Gautam Buddha Nagar 201314, India.
- Faculty of Engineering, University of Kragujevac, SestreJanjić 6, 34000 Kragujevac, Serbia.
- Department of Physics, GLA University, Mathura 281406, India.
- School of Engineering, Faculty of Technology, University of Sunderland, Sunderland SR6 0DD, UK.
- Centre of Research Impact and Outcome, Chitkara University Institute of Engineering and Technology, Chitkara University, Punjab 140401, India.
- Department of Physics, Faculty of Applied and Basic Sciences, SGT University, Gurugram 122505, India.
ORCID-Profile: Sachin Kumar Sharma, Sandra Gajević, Dhanesh G Mohan, Yogesh Sharma, Blaža Stojanović
Zitieren
APA
Sharma, S. K., Gajević, S., Sharma, L. K., Mohan, D. G., Sharma, Y., Radojković, M., & Stojanović, B. (2025). Significance of the Powder Metallurgy Approach and Its Processing Parameters on the Mechanical Behavior of Magnesium-Based Materials. Nanomaterials, 15(2), 92. https://doi.org/10.3390/nano15020092
Vancouver
Sharma SK, Gajević S, Sharma LK, Mohan DG, Sharma Y, Radojković M, et al. Significance of the Powder Metallurgy Approach and Its Processing Parameters on the Mechanical Behavior of Magnesium-Based Materials. Nanomaterials. 2025;15(2):92. doi:10.3390/nano15020092
BibTeX
@article{Sharma2025,
author = {Sharma, Sachin Kumar and Gajević, Sandra and Sharma, Lokesh Kumar and Mohan, Dhanesh G and Sharma, Yogesh and Radojković, Mladen and Stojanović, Blaža},
title = {Significance of the Powder Metallurgy Approach and Its Processing Parameters on the Mechanical Behavior of Magnesium-Based Materials},
journal = {Nanomaterials},
year = {2025},
volume = {15},
number = {2},
pages = {92},
doi = {10.3390/nano15020092}
}
EUVIMED