EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Interface Optimization and Thermal Conductivity of Cu/Diamond Composites by Spark Plasma Sintering Process

Junfeng Zhao, Hao Su, Kai Li, Haijuan Mei, Junliang Zhang, Weiping Gong iD

Nanomaterials · 06.01.2025 · 15 (1) · 73

DOI: 10.3390/nano15010073 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 06.01.2025. Verfasst von Junfeng Zhao und 5 weiteren Autor:innen. Beteiligte Einrichtung: Guangdong Provincial Key Laboratory of Electronic Functional Materials and Devices, Huizhou University, Huizhou 516001, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Featured Innovation Project of General Colleges and Universities in Guangdong Province, Guangdong Province Key Discipline Research Capacity Enhancement Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cu/Diamond (Cu/Dia) composites are regarded as next-generation thermal dissipation materials and hold tremendous potential for use in future high-power electronic devices. The interface structure between the Cu matrix and the diamond has a significant impact on the thermophysical properties of the composite materials. In this study, Cu/Dia composite materials were fabricated using the Spark Plasma Sintering (SPS) process. The results indicate that the agglomeration of diamond particles decreases with increasing particle size and that a uniform distribution is achieved at 200 μm. With an increase in the sintering temperature, the interface bonding is first optimized and then weakened, with the optimal sintering temperature being 900 °C. The addition of Cr to the Cu matrix leads to the formation of Cr7C3 after sintering, which enhances the relative density and bonding strength at the interface, transitioning it from a physical bond to a metallurgical bond. Optimizing the diamond particle size increased the thermal conductivity from 310 W/m K to 386 W/m K, while further optimizing the interface led to a significant increase to 516 W/m K, representing an overall improvement of approximately 66%.

Schlagwörter

Stichwörter der Autor:innen

Cu/diamondinterface structurethermal conductivity

Autor:innen und Institutionen

  • Guangdong Provincial Key Laboratory of Electronic Functional Materials and Devices, Huizhou University, Huizhou 516001, China.

ORCID-Profile: Weiping Gong

Förderung

  • Featured Innovation Project of General Colleges and Universities in Guangdong Province
  • Guangdong Province Key Discipline Research Capacity Enhancement Project

Zitieren

APA

Zhao, J., Su, H., Li, K., Mei, H., Zhang, J., & Gong, W. (2025). Interface Optimization and Thermal Conductivity of Cu/Diamond Composites by Spark Plasma Sintering Process. Nanomaterials, 15(1), 73. https://doi.org/10.3390/nano15010073

Vancouver

Zhao J, Su H, Li K, Mei H, Zhang J, Gong W. Interface Optimization and Thermal Conductivity of Cu/Diamond Composites by Spark Plasma Sintering Process. Nanomaterials. 2025;15(1):73. doi:10.3390/nano15010073

BibTeX
@article{Zhao2025,
  author = {Zhao, Junfeng and Su, Hao and Li, Kai and Mei, Haijuan and Zhang, Junliang and Gong, Weiping},
  title = {Interface Optimization and Thermal Conductivity of Cu/Diamond Composites by Spark Plasma Sintering Process},
  journal = {Nanomaterials},
  year = {2025},
  volume = {15},
  number = {1},
  pages = {73},
  doi = {10.3390/nano15010073}
}
Kostenlos starten →