EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Investigation on the Spark Plasma Sintering Diffusion Bonding of Diamond/Cu Composites with a Cr Interlayer

Ying Zhou, Daochun Hu, Minghe Chen, Taowen Wu iD, Jindong Ouyang, Degan Xiong

Materials · 10.12.2024 · 17 (24) · 6026

DOI: 10.3390/ma17246026 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.12.2024. Verfasst von Ying Zhou und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical & Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Natural Science Foundation of Jiangsu Province, Natural Science Foundation of Jiangsu Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Spark plasma sintering (SPS) is an effective technique for studying the diffusion bonding of diamond/Cu composites, and has the potential to advance the application of copper matrix composites. This study investigates the SPS diffusion bonding of diamond/Cu composites using a chromium (Cr) interlayer. The effects of process parameters on the microstructure and mechanical properties of the bonding interface were evaluated through shear strength testing and SEM analysis. The results show that shear strength increases with interlayer thickness up to a certain point, after which it decreases. As the bonding temperature, holding time, and bonding pressure increase, defects such as cracks and voids at the diffusion-bonded interface are reduced, resulting in improved shear strength. Under suitable conditions (10 μm interlayer, 810 °C, 60 min, and 10 MPa), the bonding interface is defect-free, achieving a maximum shear strength of 139.89 MPa and a thermal conductivity (TC) of 700.97 W/(m·K), indicating high-quality diffusion bonding.

Schlagwörter

Stichwörter der Autor:innen

Cr interlayerSPS diffusion bondingdiamond/Cu compositesthermal conductivity

Autor:innen und Institutionen

  • College of Mechanical & Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China.
  • School of Mechanical Engineering, Nanjing Vocational University of Industry Technology, Nanjing 210023, China.
  • Jiangxi Hongdu Aviation Industry Group Co., Ltd., Nanchang 330024, China.
  • Hunan Province Engineering Research Center for High Thermal Conductivity Metal-Matrix Composites, Hunan Harvest Technology Development Co., Changsha 410219, China.

ORCID-Profile: Taowen Wu

Förderung

  • the Natural Science Foundation of Jiangsu Province
  • Natural Science Foundation of Jiangsu Province

Zitieren

APA

Zhou, Y., Hu, D., Chen, M., Wu, T., Ouyang, J., & Xiong, D. (2024). An Investigation on the Spark Plasma Sintering Diffusion Bonding of Diamond/Cu Composites with a Cr Interlayer. Materials, 17(24), 6026. https://doi.org/10.3390/ma17246026

Vancouver

Zhou Y, Hu D, Chen M, Wu T, Ouyang J, Xiong D. An Investigation on the Spark Plasma Sintering Diffusion Bonding of Diamond/Cu Composites with a Cr Interlayer. Materials. 2024;17(24):6026. doi:10.3390/ma17246026

BibTeX
@article{Zhou2024,
  author = {Zhou, Ying and Hu, Daochun and Chen, Minghe and Wu, Taowen and Ouyang, Jindong and Xiong, Degan},
  title = {An Investigation on the Spark Plasma Sintering Diffusion Bonding of Diamond/Cu Composites with a Cr Interlayer},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {24},
  pages = {6026},
  doi = {10.3390/ma17246026}
}
Kostenlos starten →