EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Biocompatibility Analysis of the Silver-Coated Microporous Titanium Implants Manufactured with 3D-Printing Technology

Maxim Shevtsov iD, Emil Pitkin, Stephanie E Combs, Natalia Yudintceva iD, Denis Nazarov iD, Greg Van Der Meulen, Chris Preucil, Michael Akkaoui, Mark Pitkin

Nanomaterials · 22.11.2024 · 14 (23) · 1876

DOI: 10.3390/nano14231876 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 22.11.2024. Verfasst von Maxim Shevtsov und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Radiation Oncology, Technische Universität München (TUM), Klinikum Rechts der Isar, Ismaninger Str. 22, 81675 Munich, Germany. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIAMS NIH HHS, National Institute of Arthritis and Musculoskeletal and Skin Diseases, NIH, Technische Universität München (TUM).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

3D-printed microporous titanium scaffolds enjoy good biointegration with the residuum’s soft and bone tissues, and they promote excellent biomechanical properties in attached prostheses. Implant-associated infection, however, remains a major clinical challenge. Silver-based implant coatings can potentially reduce bacterial growth and inhibit biofilm formation, thereby reducing the risk of periprosthetic infections. In the current study, a 1-µm thick silver coating was prepared on the surface of a 3D-printed microporous titanium alloy with physical vapor deposition (PVD), with a final silver content of 1.00 ± 02 mg/cm2. Cell viability was evaluated with an MTT assay of MC3T3-E1 osteoblasts and human dermal fibroblasts cultured on the surface of the implants, and showed low cytotoxicity for cells during the 14-day follow-up period. Quantitative real-time polymerase chain reaction (RT-PCR) analysis of the relative gene expression of the extracellular matrix components (fibronectin, vitronectin, type I collagen) and cell adhesion markers (α2, α5, αV, β1 integrins) in dermal fibroblasts showed that cell adhesion was not reduced by the silver coating of the microporous implants. An RT-PCR analysis of gene expression related to osteogenic differentiation, including TGF-β1, SMAD4, osteocalcin, osteopontin, and osteonectin in MC3T3-E1 osteoblasts, demonstrated that silver coating did not reduce the osteogenic activity of cells and, to the contrary, enhanced the activity of the TGF-β signaling pathway. For representative sample S5 on day 14, the gene expression levels were 7.15 ± 0.29 (osteonectin), 6.08 ± 0.12 (osteocalcin), and 11.19 ± 0.77 (osteopontin). In conclusion, the data indicate that the silver coating of the microporous titanium implants did not reduce the biointegrative or osteoinductive properties of the titanium scaffold, a finding that argues in favor of applying this coating in designing personalized osseointegrated implants.

Schlagwörter

Stichwörter der Autor:innen

3D printingbone tissue engineeringfibroblastsosseointegrationosteoblastsscaffoldssilver coatingtitanium alloy

Autor:innen und Institutionen

  • Department of Radiation Oncology, Technische Universität München (TUM), Klinikum Rechts der Isar, Ismaninger Str. 22, 81675 Munich, Germany.
  • Laboratory of Biomedical Nanotechnologies, Institute of Cytology of the Russian Academy of Sciences (RAS), 194064 Saint Petersburg, Russia.
  • Personalized Medicine Centre, Almazov National Medical Research Centre, 2 Akkuratova Str., 197341 Saint Petersburg, Russia.
  • Department of Statistics and Data Science, The Wharton School, University of Pennsylvania, Philadelphia, PA 19104, USA.
  • Saint Petersburg State University, Universitetskaya Nab, 7/9, 199034 Saint Petersburg, Russia.
  • Movora, St. Augustine, FL 32095, USA.

ORCID-Profile: Maxim Shevtsov, Natalia Yudintceva, Denis Nazarov

Förderung

  • NIAMS NIH HHS
  • National Institute of Arthritis and Musculoskeletal and Skin Diseases, NIH
  • Technische Universität München (TUM)

Zitieren

APA

Shevtsov, M., Pitkin, E., Combs, S. E., Yudintceva, N., Nazarov, D., Meulen, G. V., Preucil, C., Akkaoui, M., & Pitkin, M. (2024). Biocompatibility Analysis of the Silver-Coated Microporous Titanium Implants Manufactured with 3D-Printing Technology. Nanomaterials, 14(23), 1876. https://doi.org/10.3390/nano14231876

Vancouver

Shevtsov M, Pitkin E, Combs SE, Yudintceva N, Nazarov D, Meulen GV, et al. Biocompatibility Analysis of the Silver-Coated Microporous Titanium Implants Manufactured with 3D-Printing Technology. Nanomaterials. 2024;14(23):1876. doi:10.3390/nano14231876

BibTeX
@article{Shevtsov2024,
  author = {Shevtsov, Maxim and Pitkin, Emil and Combs, Stephanie E and Yudintceva, Natalia and Nazarov, Denis and Meulen, Greg Van Der and Preucil, Chris and Akkaoui, Michael and Pitkin, Mark},
  title = {Biocompatibility Analysis of the Silver-Coated Microporous Titanium Implants Manufactured with 3D-Printing Technology},
  journal = {Nanomaterials},
  year = {2024},
  volume = {14},
  number = {23},
  pages = {1876},
  doi = {10.3390/nano14231876}
}
Kostenlos starten →