EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Heterogeneous Catalytic Ozonation of Pharmaceuticals: Optimization of the Process by Response Surface Methodology

Nikoletta Tsiarta iD, Wolfgang Gernjak iD, Hrvoje Cajner, Gordana Matijašić iD, Lidija Ćurković iD

Nanomaterials · 30.10.2024 · 14 (21) · 1747

DOI: 10.3390/nano14211747 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 30.10.2024. Verfasst von Nikoletta Tsiarta und 4 weiteren Autor:innen. Beteiligte Einrichtung: Catalan Institute of Water Research (ICRA)-CERCA, Carrer Emili Grahit 101, 17003 Girona, Spain. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union, Government of Catalonia, European Union’s Horizon 2020 research and innovation program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Batch heterogeneous catalytic ozonation experiments were performed using commercial and synthesized nanoparticles as catalysts in aqueous ozone. The transferred ozone dose (TOD) ranged from 0 to 150 μM, and nanoparticles were added in concentrations between 0 and 1.5 g L−1, with all experiments conducted at 20 °C and a total volume of 240 mL. A Ce-doped TiO2 catalyst (1% molar ratio of Ce/Ti) was synthesized via the sol–gel method. Response surface methodology (RSM) was applied to identify the most significant factors affecting the removal of selected pharmaceuticals, with TOD emerging as the most critical variable. Higher TOD resulted in greater removal efficiencies. Furthermore, it was found that the commercially available metal oxides α-Al2O3, Mn2O3, TiO2, and CeO2, as well as the synthesized CeTiOx, did not increase the catalytic activity of ozone during the degradation of ibuprofen (IBF) and para-chlorobenzoic acid (pCBA). Carbamazepine (CBZ) and diclofenac (DCF) are compounds susceptible to ozone oxidation, thus their complete degradation at 150 μM transferred ozone dose was attained. The limited catalytic effect was attributed to the rapid consumption of ozone within the first minute of reaction, as well as the saturation of catalyst active sites by water molecules, which inhibited effective ozone adsorption and subsequent hydroxyl radical generation (●OH).

Schlagwörter

Stichwörter der Autor:innen

heterogeneous catalytic ozonationhydroxyl radicalspharmaceuticalsresponse surface methodology

Autor:innen und Institutionen

  • Catalan Institute of Water Research (ICRA)-CERCA, Carrer Emili Grahit 101, 17003 Girona, Spain.
  • Faculty of Sciences, University of Girona, Campus de Montilivi, 17003 Girona, Spain.
  • Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Ivana Lučića 5, 10002 Zagreb, Croatia.
  • Catalan Institution for Research and Advanced Studies (ICREA), 08010 Barcelona, Spain.
  • Faculty of Chemical Engineering and Technology, University of Zagreb, 10000 Zagreb, Croatia.

ORCID-Profile: Nikoletta Tsiarta, Wolfgang Gernjak, Gordana Matijašić, Lidija Ćurković

Förderung

  • European Union
  • Government of Catalonia
  • European Union’s Horizon 2020 research and innovation program
  • Generalitat de Cataluña through the Consolidated Research Group

Zitieren

APA

Tsiarta, N., Gernjak, W., Cajner, H., Matijašić, G., & Ćurković, L. (2024). Heterogeneous Catalytic Ozonation of Pharmaceuticals: Optimization of the Process by Response Surface Methodology. Nanomaterials, 14(21), 1747. https://doi.org/10.3390/nano14211747

Vancouver

Tsiarta N, Gernjak W, Cajner H, Matijašić G, Ćurković L. Heterogeneous Catalytic Ozonation of Pharmaceuticals: Optimization of the Process by Response Surface Methodology. Nanomaterials. 2024;14(21):1747. doi:10.3390/nano14211747

BibTeX
@article{Tsiarta2024,
  author = {Tsiarta, Nikoletta and Gernjak, Wolfgang and Cajner, Hrvoje and Matijašić, Gordana and Ćurković, Lidija},
  title = {Heterogeneous Catalytic Ozonation of Pharmaceuticals: Optimization of the Process by Response Surface Methodology},
  journal = {Nanomaterials},
  year = {2024},
  volume = {14},
  number = {21},
  pages = {1747},
  doi = {10.3390/nano14211747}
}
Kostenlos starten →