EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Optimization of catalytic steam gasification for hydrogen production: response surface methodology approach

Ayisha Naziba Thaha, Karthikeyan Subburamu, Djanaguiraman Maduraimuthu, Kamaraj A, Palaniselvam Vellaichamy, Ramesh Desikan

Clean Energy · 06.02.2026 · 10 (1) · 78-93

DOI: 10.1093/ce/zkaf062 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Clean Energy, online erschienen am 23.10.2025. Verfasst von Ayisha Naziba Thaha und 5 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 92 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Indian Council of Agricultural Research, Consortia Research Platform on Energy from Agriculture, Department of Renewable Energy Engineering, Agricultural Engineering College & Research Institute, Tamil Nadu Agricultural University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The current investigation delves into the process of the optimization of hydrogen production via catalytic steam gasification within a fixed-bed downdraft gasifier. This study optimized hydrogen-rich syngas production from biomass by using catalytic steam gasification in a fixed-bed reactor. Response surface methodology with a Box-Behnken design was employed to model the effects of the steam-to-biomass ratio (1–3), nanocatalyst loading (5–15 wt%), and airflow rate (20–40 L min−1) on syngas yield and hydrogen content. The derived quadratic model was highly significant, with optimization identifying an airflow rate of 30 L min−1, steam-to-biomass ratio of 3.0, and nanocatalyst loading of 5 wt% as the ideal conditions. Experimental validation under these parameters confirmed the excellent predictive capability of the model, yielding 1.69 m3 kg−1 of syngas with a high hydrogen content of 65.9% along with carbon monoxide of 13.2%, carbon dioxide of 8.6%, and methane of 1.3%. This represented a substantial enhancement over conventional air gasification, which produced only 1.52 m3 kg−1 syngas with 16.2% H2. The optimized catalytic steam-gasification process achieved a cold gas efficiency of 82.5% and a hydrogen yield of 108.8 g kg−1 of biomass, driven by the synergistic effect of steam and the nanocatalyst in promoting tar cracking and reforming reactions. The resulting syngas had a heating value of 11.49 MJ Nm−3. These results demonstrate that the response-surface-methodology-guided optimization of nanocatalytic steam gasification is a highly effective strategy for producing a high-quality, hydrogen-rich syngas, marking a significant improvement in process efficiency for sustainable energy applications.

Förderung

  • Indian Council of Agricultural Research
  • Consortia Research Platform on Energy from Agriculture
  • Department of Renewable Energy Engineering, Agricultural Engineering College & Research Institute, Tamil Nadu Agricultural University

Zitieren

APA

Thaha, A. N., Subburamu, K., Maduraimuthu, D., A, K., Vellaichamy, P., & Desikan, R. (2026). Optimization of catalytic steam gasification for hydrogen production: response surface methodology approach. Clean Energy, 10(1), 78-93. https://doi.org/10.1093/ce/zkaf062

Vancouver

Thaha AN, Subburamu K, Maduraimuthu D, A K, Vellaichamy P, Desikan R. Optimization of catalytic steam gasification for hydrogen production: response surface methodology approach. Clean Energy. 2026;10(1):78-93. doi:10.1093/ce/zkaf062

BibTeX
@article{Thaha2026,
  author = {Thaha, Ayisha Naziba and Subburamu, Karthikeyan and Maduraimuthu, Djanaguiraman and A, Kamaraj and Vellaichamy, Palaniselvam and Desikan, Ramesh},
  title = {Optimization of catalytic steam gasification for hydrogen production: response surface methodology approach},
  journal = {Clean Energy},
  year = {2026},
  volume = {10},
  number = {1},
  pages = {78--93},
  doi = {10.1093/ce/zkaf062}
}
Kostenlos starten →