EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Coupled Precipitation of Dual-Nanoprecipitates to Optimize Microstructural and Mechanical Properties of Cast Al–Cu–Mg–Mn Alloys via Modulating the Mn Contents

Han Zhang iD, Qitang Hao, Xinlei Li, Wentao Yu, Yanqing Xue

Nanomaterials · 28.11.2023 · 13 (23) · 3038

DOI: 10.3390/nano13233038 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 28.11.2023. Verfasst von Han Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shaanxi Polytechnic Institute, Key Research and Development Plan of Shaanxi Province, Xianyang City Qin Chuang Yuan Science and Technology Innovation Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effect of Mn content on the microstructure evolution and mechanical properties of Al–Cu–Mg–x Mn alloys at ambient temperature was investigated. The findings show that in the Mn-containing alloys at the as-cast state, the blocky primary T(Al20Cu2Mn3) phase coexisting with the Al2Cu phase appeared. With the increase in Mn content, the majority of the Al2Cu phase dissolved, nd a minor amount of the T phase remained at the grain boundary after solution treatment. The rod-like TMn (Al20Cu2Mn3) nanoprecipitate was simultaneously distributed at grain boundaries and the interiors, while a high density of needle-like θ″ (Al3Cu) nanoprecipitate was also observed in the T6 state. Further increases in Mn content promoted the dispersion of the TMn phase and inhibited the growth and transformation of the θ″ phase. Tensile test results show that 0.7 wt.% Mn alloy had excellent mechanical properties at ambient temperature with ultimate tensile strength, yield strength, and fracture elongation of 498.7 MPa, 346.2 MPa, and 19.2%, respectively. The subsequent calculation of strengthening mechanisms elucidates that precipitation strengthening is the main reason for the increase in yield strength of Mn-containing alloys.

Schlagwörter

Stichwörter der Autor:innen

Al–Cu–Mg–Mn alloysmechanical propertiesmicrostructurenanoprecipitatesstrengthening mechanisms

Autor:innen und Institutionen

  • State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072, China.
  • Shaanxi Key Laboratory of Surface Engineering and Remanufacturing, Xi'an University, Xi'an 710065, China.

ORCID-Profile: Han Zhang

Förderung

  • Shaanxi Polytechnic Institute
  • Key Research and Development Plan of Shaanxi Province
  • Xianyang City Qin Chuang Yuan Science and Technology Innovation Project

Zitieren

APA

Zhang, H., Hao, Q., Li, X., Yu, W., & Xue, Y. (2023). Coupled Precipitation of Dual-Nanoprecipitates to Optimize Microstructural and Mechanical Properties of Cast Al–Cu–Mg–Mn Alloys via Modulating the Mn Contents. Nanomaterials, 13(23), 3038. https://doi.org/10.3390/nano13233038

Vancouver

Zhang H, Hao Q, Li X, Yu W, Xue Y. Coupled Precipitation of Dual-Nanoprecipitates to Optimize Microstructural and Mechanical Properties of Cast Al–Cu–Mg–Mn Alloys via Modulating the Mn Contents. Nanomaterials. 2023;13(23):3038. doi:10.3390/nano13233038

BibTeX
@article{Zhang2023,
  author = {Zhang, Han and Hao, Qitang and Li, Xinlei and Yu, Wentao and Xue, Yanqing},
  title = {Coupled Precipitation of Dual-Nanoprecipitates to Optimize Microstructural and Mechanical Properties of Cast Al–Cu–Mg–Mn Alloys via Modulating the Mn Contents},
  journal = {Nanomaterials},
  year = {2023},
  volume = {13},
  number = {23},
  pages = {3038},
  doi = {10.3390/nano13233038}
}
Kostenlos starten →