Microstructural Evolution and Mechanical Properties of Al-Si-Mg-Cu Cast Alloys with Different Cu Contents
Metals · 02.01.2023 · 13 (1) · 98
DOI: 10.3390/met13010098 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 02.01.2023. Verfasst von Pengfei Zhou und 7 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, The Research Fund for International Senior Scientists, Aluminum-based Transportation Lightweighting Technology Demonstration Project.
Abstract (Originalsprache)
The mechanical properties of Al-Si-Mg-Cu cast alloys are heavily determined by Cu content due to the precipitation of relating strengthening precipitates during the aging treatment. In this study, the microstructures and mechanical properties of Al-9Si-0.5Mg-xCu (x = 0, 0.9, 1.5, and 2.1 wt.%) alloys were investigated to elucidate the effect of Cu content on the evolution of their mechanical properties. After T6 (480 °C + 6 h − 530 °C + 4 h, 175 °C + 10 h) treatment, Mg-rich and Cu-rich phases were dissolved in the matrix; the main aging-precipitates of the alloys change from the needle-like β″ phases in the base alloy to the granular Q′ phases in the 0.9Cu alloy, the granular Q′ phase in the 1.5Cu alloy, the granular Q′ phase, and θ′ platelets in the 2.1Cu alloy. The increase of Cu level results in difference of the type, number density, and morphology of the nanoscale precipitated phase. Because of precipitation strength, the yield strength was increased by 103–130 MPa depending on the Cu contents. The precipitation strengthening effect of the precipitates was quantitatively evaluated by the Orowan mechanism. The aging-treated Al-9Si-0.5Mg-2Cu alloy shows the good strength and ductility: yield strength 351 MPa, ultimate tensile strength 442 MPa, and elongation 8.4%. The morphologies of fracture surfaces of the alloys also were observed.
Förderung
- National Natural Science Foundation of China
- The Research Fund for International Senior Scientists
- Aluminum-based Transportation Lightweighting Technology Demonstration Project
- National Foreign Expert Project 2022
Zitieren
APA
Zhou, P., Wang, D., Nagaumi, H., Wang, R., Zhang, X., Li, X., Zhang, H., & Zhang, B. (2023). Microstructural Evolution and Mechanical Properties of Al-Si-Mg-Cu Cast Alloys with Different Cu Contents. Metals, 13(1), 98. https://doi.org/10.3390/met13010098
Vancouver
Zhou P, Wang D, Nagaumi H, Wang R, Zhang X, Li X, et al. Microstructural Evolution and Mechanical Properties of Al-Si-Mg-Cu Cast Alloys with Different Cu Contents. Metals. 2023;13(1):98. doi:10.3390/met13010098
BibTeX
@article{Zhou2023,
author = {Zhou, Pengfei and Wang, Dongtao and Nagaumi, Hiromi and Wang, Rui and Zhang, Xiaozu and Li, Xinzhong and Zhang, Haitao and Zhang, Bo},
title = {Microstructural Evolution and Mechanical Properties of Al-Si-Mg-Cu Cast Alloys with Different Cu Contents},
journal = {Metals},
year = {2023},
volume = {13},
number = {1},
pages = {98},
doi = {10.3390/met13010098}
}
EUVIMED