3D-Printed Piezoelectret Based on Foamed Polylactic Acid for Energy-Harvesting and Sensing Applications
Nanomaterials · 15.11.2023 · 13 (22) · 2953
DOI: 10.3390/nano13222953 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 15.11.2023. Verfasst von Gabriele Perna und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics and Geology, University of Perugia, Via A. Pascoli, 06123 Perugia, Italy. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union - NextGenerationEU under the Italian Ministry of University and Research (MUR) National Innovation Ecosystem, MUR and EU-FSE through PON Research and Innovation 2014-2020, European Union—NextGenerationEU under the Italian Ministry of University and Research (MUR) National Innovation Ecosystem.
Abstract (Originalsprache)
Poly(lactic) acid (PLA) is a bio-compatible polymer widely used in additive manufacturing, and in the form of cellular foam it shows excellent mechanical and piezoelectric properties. This type of structure can be easily 3D-printed by Fusion Deposition Modelling (FDM) with commercially available composite filaments. In this work, we present mechanical and electrical investigations on 3D-printed low-cost and eco-friendly foamed PLA. The cellular microstructure and the foaming degree were tuned by varying extrusion temperature and flowrate. The maximum surface potential and charge stability of disk samples were found in correspondence of extrusion temperature between 230 and 240 °C with a flowrate of 53–44% when charging on a heated bed at 85 °C. The cells’ morphology and correlated mechanical properties were analyzed and the measured piezoelectric d33 coefficient was found to be 212 pC/N. These findings show the importance of printing parameters and thermal treatment during the charging process in order to obtain the highest charge storage, stability and material flexibility. These results suggest that 3D-printed cellular PLA is a promising sustainable material for sensing and energy-harvesting applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Physics and Geology, University of Perugia, Via A. Pascoli, 06123 Perugia, Italy.
- Materials Foundry (IOM-CNR), National Research Council, c/o Department of Physics and Geology, Via A. Pascoli, 06123 Perugia, Italy.
- Department of Civil and Environmental Engineering, University of Perugia, Strada di Pentima 4, 05100 Terni, Italy.
ORCID-Profile: Gabriele Perna, Francesco Bonacci, Silvia Caponi, Giacomo Clementi, Alessandro Di Michele, Luca Gammaitoni, Maurizio Mattarelli, Igor Neri, Debora Puglia, Francesco Cottone
Förderung
- European Union - NextGenerationEU under the Italian Ministry of University and Research (MUR) National Innovation Ecosystem
- MUR and EU-FSE through PON Research and Innovation 2014-2020
- European Union—NextGenerationEU under the Italian Ministry of University and Research (MUR) National Innovation Ecosystem
- MUR and EU-FSE through PON Research and Innovation 2014–2020, action IV.5 “Dottorati su tematiche Green”
Zitieren
APA
Perna, G., Bonacci, F., Caponi, S., Clementi, G., Di Michele, A., Gammaitoni, L., Mattarelli, M., Neri, I., Puglia, D., & Cottone, F. (2023). 3D-Printed Piezoelectret Based on Foamed Polylactic Acid for Energy-Harvesting and Sensing Applications. Nanomaterials, 13(22), 2953. https://doi.org/10.3390/nano13222953
Vancouver
Perna G, Bonacci F, Caponi S, Clementi G, Di Michele A, Gammaitoni L, et al. 3D-Printed Piezoelectret Based on Foamed Polylactic Acid for Energy-Harvesting and Sensing Applications. Nanomaterials. 2023;13(22):2953. doi:10.3390/nano13222953
BibTeX
@article{Perna2023,
author = {Perna, Gabriele and Bonacci, Francesco and Caponi, Silvia and Clementi, Giacomo and Di Michele, Alessandro and Gammaitoni, Luca and Mattarelli, Maurizio and Neri, Igor and Puglia, Debora and Cottone, Francesco},
title = {3D-Printed Piezoelectret Based on Foamed Polylactic Acid for Energy-Harvesting and Sensing Applications},
journal = {Nanomaterials},
year = {2023},
volume = {13},
number = {22},
pages = {2953},
doi = {10.3390/nano13222953}
}
EUVIMED