Antimony Selenide Solar Cells Fabricated by Hybrid Reactive Magnetron Sputtering
Nanomaterials · 05.08.2023 · 13 (15) · 2257
DOI: 10.3390/nano13152257 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 05.08.2023. Verfasst von Daniel Brito und 10 weiteren Autor:innen. Beteiligte Einrichtung: International Iberian Nanotechnology Laboratory, Av. Mestre José Veiga, 4715-330 Braga, Portugal. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: “Micro-concentrator thin film solar cells (MiconCell)” project, Fundação para a Ciência e Tecnologia (FCT, Portugal) and the ERDF, FCT for the Ph.D. Grant.
Abstract (Originalsprache)
The fabrication of Sb2Se3 thin-film solar cells deposited by a pulsed hybrid reactive magnetron sputtering (PHRMS) was proposed and examined for different growth conditions. The influence of growth temperature and Se pulse period were studied in terms of morphology, crystal structure, and composition. The Sb2Se3 growth showed to be dependent on the growth temperature, with a larger crystal size for growth at 270 °C. By controlling the Se pulse period, the crystal structure and crystal size could be modified as a function of the supplied Se amount. The solar cell performance for Sb2Se3 absorbers deposited at various temperatures, Se pulse periods and thicknesses were assessed through current-voltage characteristics. A power conversion efficiency (PCE) of 3.7% was achieved for a Sb2Se3 solar cell with 900 nm thickness, Sb2Se3 deposited at 270 °C and Se pulses with 0.1 s duration and period of 0.5 s. Finally, annealing the complete solar cell at 100 °C led to a further improvement of the Voc, leading to a PCE of 3.8%, slightly higher than the best reported Sb2Se3 solar cell prepared by sputtering without post-selenization.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- International Iberian Nanotechnology Laboratory, Av. Mestre José Veiga, 4715-330 Braga, Portugal.
- Departamento de Física e Astronomia, Faculdade de Ciências, Universidade do Porto, Rua do Campo Alegre s/n, 4169-007 Porto, Portugal.
- Nanotechnology Group, Department of Fundamental Physics, University of Salamanca, 37008 Salamanca, Spain.
- Centre of Physics of Minho and Porto Universities (CF-UM-UP), Azurém Campus, 4800-058 Guimarães, Portugal.
ORCID-Profile: Pedro Anacleto, Marcel S Claro, Sascha Sadewasser
Förderung
- “Micro-concentrator thin film solar cells (MiconCell)” project
- Fundação para a Ciência e Tecnologia (FCT, Portugal) and the ERDF
- FCT for the Ph.D. Grant
- Spanish Ministry of Science, Innovation, and Universities and FEDER (ERDF: European Regional Development Fund) under the FEDER/Junta de Castilla y León Researc…
- Marie Skłodowska Curie-COFUND program under the Horizon 2020 research and innovation initiative of the European Union, within the framework of the USAL4Excelle…
- MSCA grant CIGNUS
Zitieren
APA
Brito, D., Anacleto, P., Pérez-Rodríguez, A., Fonseca, J., Santos, P., Alves, M., Cavalli, A., Sharma, D., Claro, M. S., Nicoara, N., & Sadewasser, S. (2023). Antimony Selenide Solar Cells Fabricated by Hybrid Reactive Magnetron Sputtering. Nanomaterials, 13(15), 2257. https://doi.org/10.3390/nano13152257
Vancouver
Brito D, Anacleto P, Pérez-Rodríguez A, Fonseca J, Santos P, Alves M, et al. Antimony Selenide Solar Cells Fabricated by Hybrid Reactive Magnetron Sputtering. Nanomaterials. 2023;13(15):2257. doi:10.3390/nano13152257
BibTeX
@article{Brito2023,
author = {Brito, Daniel and Anacleto, Pedro and Pérez-Rodríguez, Ana and Fonseca, José and Santos, Pedro and Alves, Marina and Cavalli, Alessandro and Sharma, Deepanjan and Claro, Marcel S and Nicoara, Nicoleta and Sadewasser, Sascha},
title = {Antimony Selenide Solar Cells Fabricated by Hybrid Reactive Magnetron Sputtering},
journal = {Nanomaterials},
year = {2023},
volume = {13},
number = {15},
pages = {2257},
doi = {10.3390/nano13152257}
}
EUVIMED