EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Advances in Flexible Thermoelectric Materials and Devices Fabricated by Magnetron Sputtering

Boxuan Hu, Xiao-Lei Shi, Tianyi Cao, Meng Li, Wenyi Chen, Wei-Di Liu, Wanyu Lyu, Tuquabo Tesfamichael, Zhi-Gang Chen iD

Small Science · 2025-03 · 5 (3)

DOI: 10.1002/smsc.202300061 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Science, online erschienen am 18.07.2023. Verfasst von Boxuan Hu und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemistry and Physics Queensland University of Technology Brisbane Queensland 4001 Australia. Die Arbeit wurde bisher 92-mal zitiert (Crossref) und nennt 178 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Due to the direct conversion between thermal and electrical energy, thermoelectric materials and their devices exhibit great potential for power generation and refrigeration. With the rapid development of personal wearable electronics, the design of flexible inorganic thermoelectric materials and devices receives increasing attention. As one of the most mature thin‐film fabrication techniques, magnetron sputtering plays a key role in the fabrication of inorganic thermoelectric thin films and devices, but its progress is still not timely and comprehensively reviewed. Herein, recent advances in magnetron sputtering‐fabricated thermoelectric materials and devices are studied, including their thermoelectric properties, mechanical properties, and device design routes. The differences in the properties of thermoelectric materials under different sputtering conditions, as well as their underlying mechanisms, are carefully discussed. In the end, it is pointed out the challenges and future directions for magnetron sputtering‐prepared inorganic thermoelectric thin‐film materials and devices for practical applications. This review can serve as a useful reference to guide the design of inorganic thermoelectric materials and devices prepared by magnetron‐sputtering‐based deposition techniques.

Schlagwörter

Stichwörter der Autor:innen

inorganicsmagnetron sputteringthermoelectricsthin films

Autor:innen und Institutionen

  • School of Chemistry and Physics Queensland University of Technology Brisbane Queensland 4001 Australia.
  • School of Mechanical and Mining Engineering The University of Queensland Brisbane Queensland 4072 Australia.
  • Australian Institute for Bioengineering and Nanotechnology The University of Queensland Brisbane Queensland 4072 Australia.
  • School of Mechanical, Medical and Process Engineering Queensland University of Technology Brisbane Queensland 4001 Australia.

ORCID-Profile: Zhi-Gang Chen

Förderung

  • Australian Research Council

Zitieren

APA

Hu, B., Shi, X. L., Cao, T., Li, M., Chen, W., Liu, W. D., Lyu, W., Tesfamichael, T., & Chen, Z. G. (2025). Advances in Flexible Thermoelectric Materials and Devices Fabricated by Magnetron Sputtering. Small Science, 5(3). https://doi.org/10.1002/smsc.202300061

Vancouver

Hu B, Shi XL, Cao T, Li M, Chen W, Liu WD, et al. Advances in Flexible Thermoelectric Materials and Devices Fabricated by Magnetron Sputtering. Small Science. 2025;5(3). doi:10.1002/smsc.202300061

BibTeX
@article{Hu2025,
  author = {Hu, Boxuan and Shi, Xiao-Lei and Cao, Tianyi and Li, Meng and Chen, Wenyi and Liu, Wei-Di and Lyu, Wanyu and Tesfamichael, Tuquabo and Chen, Zhi-Gang},
  title = {Advances in Flexible Thermoelectric Materials and Devices Fabricated by Magnetron Sputtering},
  journal = {Small Science},
  year = {2025},
  volume = {5},
  number = {3},
  doi = {10.1002/smsc.202300061}
}
Kostenlos starten →