EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermally Conductive and Electrically Insulating Epoxy Composites Filled with Network-like Alumina In Situ Coated Graphene

Ruicong Lv, Haichang Guo, Lei Kang, Akbar Bashir, Liucheng Ren, Hongyu Niu, Shulin Bai

Nanomaterials · 03.08.2023 · 13 (15) · 2243

DOI: 10.3390/nano13152243 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 03.08.2023. Verfasst von Ruicong Lv und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, HEDPS/Center for Applied Physics and Technology, Peking University, Beijing 100871, China. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, The National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the rapid development of the electronics industry, there is a growing demand for packaging materials that possess both high thermal conductivity (TC) and low electrical conductivity (EC). However, traditional insulating fillers such as boron nitride, aluminum nitride, and alumina (Al2O3) have relatively low intrinsic TC. When graphene, which exhibits both superhigh TC and EC, is used as a filler to fill epoxy resin, the TC of blends can be much higher than that of blends containing more traditional fillers. However, the high EC of graphene limits its application in cases where electrical insulation is required. To address this challenge, a method for coating graphene sheets with an in situ grown Al2O3 layer has been proposed for the fabrication of epoxy-based composites with both high TC and low EC. In the presence of a cationic surfactant, a dense Al2O3 layer with a network structure can be formed on the surface of graphene sheets. When the total content of Al2O3 and graphene mixed filler reached 30 wt%, the TC of the epoxy composite reached 0.97 W m−1 K−1, while the EC remained above 1011 Ω·cm. Finite element simulations accurately predicted TC and EC values in accordance with experimental results. This material, with its combination of high TC and good insulation properties, exhibits excellent potential for microelectronic packaging applications.

Schlagwörter

Stichwörter der Autor:innen

aluminaepoxy compositegrapheneinsulationthermal conductivity

Autor:innen und Institutionen

  • School of Materials Science and Engineering, HEDPS/Center for Applied Physics and Technology, Peking University, Beijing 100871, China.
  • Peking University Nanchang Innovation Institute, 14#1-2 Floor, High-Level Talent Industrial Park, High-Tech District, Nanchang 330000, China.

Förderung

  • National Natural Science Foundation of China
  • The National Key Research and Development Program of China

Zitieren

APA

Lv, R., Guo, H., Kang, L., Bashir, A., Ren, L., Niu, H., & Bai, S. (2023). Thermally Conductive and Electrically Insulating Epoxy Composites Filled with Network-like Alumina In Situ Coated Graphene. Nanomaterials, 13(15), 2243. https://doi.org/10.3390/nano13152243

Vancouver

Lv R, Guo H, Kang L, Bashir A, Ren L, Niu H, et al. Thermally Conductive and Electrically Insulating Epoxy Composites Filled with Network-like Alumina In Situ Coated Graphene. Nanomaterials. 2023;13(15):2243. doi:10.3390/nano13152243

BibTeX
@article{Lv2023,
  author = {Lv, Ruicong and Guo, Haichang and Kang, Lei and Bashir, Akbar and Ren, Liucheng and Niu, Hongyu and Bai, Shulin},
  title = {Thermally Conductive and Electrically Insulating Epoxy Composites Filled with Network-like Alumina In Situ Coated Graphene},
  journal = {Nanomaterials},
  year = {2023},
  volume = {13},
  number = {15},
  pages = {2243},
  doi = {10.3390/nano13152243}
}
Kostenlos starten →