Electrically and Thermally Triggered Three-Dimensional Graphene-Foam-Reinforced Shape Memory Epoxy Composites
Polymers · 30.06.2023 · 15 (13) · 2903
DOI: 10.3390/polym15132903 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 30.06.2023. Verfasst von Adeyinka Idowu und 4 weiteren Autor:innen. Beteiligte Einrichtung: Plasma Forming Laboratory, Department of Mechanical and Materials Engineering, Florida International University, Miami, FL 33174, USA. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: US Army Research Office.
Abstract (Originalsprache)
Shape memory polymer (SMP) epoxy composites have attracted significant attention due to their easy processing, lightweight nature, and ability to recover strain. However, their limited recovery rate and inferior mechanical properties have hindered their functional applications. This research explores the potential of three-dimensional (3D) graphene foam (GrF) as a highly efficient reinforcement for SMP epoxy composites. We demonstrated that the incorporation of a mere 0.13 wt.% GrF into mold-cast SMP epoxy leads to a 19% increase in the glass transition temperature (Tg). To elucidate the reinforcing mechanism, we fabricated and extensively analyzed composites with varying weight percentages of GrF. The GrF-based SMP epoxy composite exhibits a 57% increase in thermal conductivity, measuring 0.296 W mK−1 at 70 °C, due to the interconnected 3D graphene network within the matrix. Notably, this composite also demonstrates remarkable electrical conductivity, making it suitable for dual-triggering applications. The GrF-SMP epoxy composite achieves a maximum shape recovery ratio and a significant 23% improvement in the recovery rate, effectively addressing the issue of slow recovery associated with SMPs. We investigated the effect of switching temperatures on the shape recovery rate. We identified the optimal triggering temperature to initiate shape recovery for epoxy SMP and GrF-epoxy SMP as thermal energy equivalent to Tg + 20 °C. Additionally, we fabricated a bird-shaped composite using GrF reinforcement, which showcases self-healing capabilities through the crack opening and closure and serves as a tangible demonstration of the transformative potential of the composite. These GrF-epoxy SMP composites, responsive to stimuli, hold immense promise for diverse applications, such as mechanical systems, wearable sensors, morphing wings, foldable robots, and antennas.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Plasma Forming Laboratory, Department of Mechanical and Materials Engineering, Florida International University, Miami, FL 33174, USA.
ORCID-Profile: Adeyinka Idowu, Tony Thomas, Benjamin Boesl, Arvind Agarwal
Förderung
- US Army Research Office
Zitieren
APA
Idowu, A., Thomas, T., Bustillos, J., Boesl, B., & Agarwal, A. (2023). Electrically and Thermally Triggered Three-Dimensional Graphene-Foam-Reinforced Shape Memory Epoxy Composites. Polymers, 15(13), 2903. https://doi.org/10.3390/polym15132903
Vancouver
Idowu A, Thomas T, Bustillos J, Boesl B, Agarwal A. Electrically and Thermally Triggered Three-Dimensional Graphene-Foam-Reinforced Shape Memory Epoxy Composites. Polymers. 2023;15(13):2903. doi:10.3390/polym15132903
BibTeX
@article{Idowu2023,
author = {Idowu, Adeyinka and Thomas, Tony and Bustillos, Jenniffer and Boesl, Benjamin and Agarwal, Arvind},
title = {Electrically and Thermally Triggered Three-Dimensional Graphene-Foam-Reinforced Shape Memory Epoxy Composites},
journal = {Polymers},
year = {2023},
volume = {15},
number = {13},
pages = {2903},
doi = {10.3390/polym15132903}
}
EUVIMED