EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Mechanical Properties of Blended Fibrinogen:Polycaprolactone (PCL) Nanofibers

Nouf Alharbi, Annelise Brigham, Martin Guthold iD

Nanomaterials · 13.04.2023 · 13 (8) · 1359

DOI: 10.3390/nano13081359 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 13.04.2023. Verfasst von Nouf Alharbi und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, Wake Forest University, Winston-Salem, NC 27109, USA. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Center for Functional Materials, Wake Forest University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electrospinning is a process to produce versatile nanoscale fibers. In this process, synthetic and natural polymers can be combined to produce novel, blended materials with a range of physical, chemical, and biological properties. We electrospun biocompatible, blended fibrinogen:polycaprolactone (PCL) nanofibers with diameters ranging from 40 nm to 600 nm, at 25:75 and 75:25 blend ratios and determined their mechanical properties using a combined atomic force/optical microscopy technique. Fiber extensibility (breaking strain), elastic limit, and stress relaxation times depended on blend ratios but not fiber diameter. As the fibrinogen:PCL ratio increased from 25:75 to 75:25, extensibility decreased from 120% to 63% and elastic limit decreased from a range between 18% and 40% to a range between 12% and 27%. Stiffness-related properties, including the Young’s modulus, rupture stress, and the total and relaxed, elastic moduli (Kelvin model), strongly depended on fiber diameter. For diameters less than 150 nm, these stiffness-related quantities varied approximately as D−2; above 300 nm the diameter dependence leveled off. 50 nm fibers were five–ten times stiffer than 300 nm fibers. These findings indicate that fiber diameter, in addition to fiber material, critically affects nanofiber properties. Drawing on previously published data, a summary of the mechanical properties for fibrinogen:PCL nanofibers with ratios of 100:0, 75:25, 50:50, 25:75 and 0:100 is provided.

Schlagwörter

Stichwörter der Autor:innen

diameter dependenceelectrospinningfibrinogenmechanical propertiesnanofiberspolycaprolactone

Autor:innen und Institutionen

  • Department of Physics, Wake Forest University, Winston-Salem, NC 27109, USA.

ORCID-Profile: Martin Guthold

Förderung

  • Center for Functional Materials, Wake Forest University

Zitieren

APA

Alharbi, N., Brigham, A., & Guthold, M. (2023). The Mechanical Properties of Blended Fibrinogen:Polycaprolactone (PCL) Nanofibers. Nanomaterials, 13(8), 1359. https://doi.org/10.3390/nano13081359

Vancouver

Alharbi N, Brigham A, Guthold M. The Mechanical Properties of Blended Fibrinogen:Polycaprolactone (PCL) Nanofibers. Nanomaterials. 2023;13(8):1359. doi:10.3390/nano13081359

BibTeX
@article{Alharbi2023,
  author = {Alharbi, Nouf and Brigham, Annelise and Guthold, Martin},
  title = {The Mechanical Properties of Blended Fibrinogen:Polycaprolactone (PCL) Nanofibers},
  journal = {Nanomaterials},
  year = {2023},
  volume = {13},
  number = {8},
  pages = {1359},
  doi = {10.3390/nano13081359}
}
Kostenlos starten →