EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ion Selective Electrode (ISE) Method for Determination of Total Fluorine and Total Organic Fluorine in Packaging Substrates

Ma Cristine Concepcion D Ignacio iD, Greg W Curtzwiler iD, Mark R Early iD, Katie M Updegraff iD, Keith L Vorst iD

Methods and Protocols · 18.01.2023 · 6 (1) · 10

DOI: 10.3390/mps6010010 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Methods and Protocols, online erschienen am 18.01.2023. Verfasst von Ma Cristine Concepcion D Ignacio und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Agricultural and Biosystems Engineering, Iowa State University, Ames, IA 50011, USA. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Polymer and Food Protection Consortium (PFPC) at Iowa State University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Various testing methods and techniques have been used to identify and quantify per- and polyfluoroalkyl substances (PFAS) in food packaging. A common indirect measurement of PFAS is total fluorine (TF) and total organic fluorine (TOF). These methods are critical in rapidly screening food packaging materials for the >9000 PFAS and are often globally used for regulatory limits. However, this destructive approach requires careful sample preparation, combustion, and the analysis of the solution by a fluoride-specific electrode. The method described herein is a cost-effective, rapid, quantitative, and externally validated initial screening of packaging materials for fluoro-chemistry. This study presents validated protocols for measuring TF and TOF in packaging substrates using oxygen combustion sample preparation coupled with fluoride ion-selective electrode (F-ISE); the materials and required equipment are provided, and the step-by-step procedure from sample preparation to the analysis are described, including critical steps to minimize contamination and interferences during sample preparation.

Schlagwörter

Stichwörter der Autor:innen

food packaging materialsion selective electrode (ISE)per- and polyfluoroalkyl substances (PFAS)total fluorinetotal organic fluorine

Autor:innen und Institutionen

  • Department of Agricultural and Biosystems Engineering, Iowa State University, Ames, IA 50011, USA.
  • Department of Food Science and Human Nutrition, Iowa State University, Ames, IA 50011, USA.

ORCID-Profile: Ma Cristine Concepcion D Ignacio, Greg W Curtzwiler, Mark R Early, Katie M Updegraff, Keith L Vorst

Förderung

  • Polymer and Food Protection Consortium (PFPC) at Iowa State University

Zitieren

APA

Ignacio, M. C. C. D., Curtzwiler, G. W., Early, M. R., Updegraff, K. M., & Vorst, K. L. (2023). Ion Selective Electrode (ISE) Method for Determination of Total Fluorine and Total Organic Fluorine in Packaging Substrates. Methods and Protocols, 6(1), 10. https://doi.org/10.3390/mps6010010

Vancouver

Ignacio MCCD, Curtzwiler GW, Early MR, Updegraff KM, Vorst KL. Ion Selective Electrode (ISE) Method for Determination of Total Fluorine and Total Organic Fluorine in Packaging Substrates. Methods and Protocols. 2023;6(1):10. doi:10.3390/mps6010010

BibTeX
@article{Ignacio2023,
  author = {Ignacio, Ma Cristine Concepcion D and Curtzwiler, Greg W and Early, Mark R and Updegraff, Katie M and Vorst, Keith L},
  title = {Ion Selective Electrode (ISE) Method for Determination of Total Fluorine and Total Organic Fluorine in Packaging Substrates},
  journal = {Methods and Protocols},
  year = {2023},
  volume = {6},
  number = {1},
  pages = {10},
  doi = {10.3390/mps6010010}
}
Kostenlos starten →