EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation and Performance of 3D-Printed TiO2-Supported TPMS Structures for Photocatalytic Applications

Xi Chen, Chenxi Zhang, Xiao Chen, Ningning Li iD

Molecules · 26.09.2025 · 30 (19) · 3891

DOI: 10.3390/molecules30193891 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Molecules, online erschienen am 26.09.2025. Verfasst von Xi Chen und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, North China University of Water Resources and Electric Power, Zhengzhou 450045, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Henan Province Research-Oriented Teaching Reform Research and Practice Project, 2023 Henan Province Research-Oriented Teaching Reform Research and Practice Project, Natural Science Foundation of Henan Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study addresses critical bottlenecks in photocatalytic water treatment technologies, including difficulties in recovering traditional powdered catalysts, low mass transfer efficiency in immobilized reactors, and limited structural diversity. By integrating topology optimization with 3D printing technology, we designed and fabricated five types of triply periodic minimal surface photocatalytic reactors (TPMS-PCRs) with hierarchical porous structures—Fischer-Radin-Dunn (FRD), Neovius (N), Diamond (D), I-graph Wrapped Package (IWP) and Gyroid (G). Using fused deposition modeling (FDM), these TPMS configurations were manufactured from polylactic acid (PLA), 1.5 wt% TiO2/PLA, and 2.5 wt% TiO2/PLA. The catalytic degradation performance of these structurally distinct reactors for organic pollutants varied significantly. Notably, the FRD-type TPMS-PCR loaded with 2.5 wt% TiO2 achieved a methylene blue (MB) degradation rate of 93.4% within 2.5 h under rotational flow conditions, compared to 87.5% under horizontal flow conditions.

Schlagwörter

Stichwörter der Autor:innen

TiO2/PLA compositephotocatalytic reactortriply periodic minimal surface (TPMS) model

Autor:innen und Institutionen

  • School of Materials Science and Engineering, North China University of Water Resources and Electric Power, Zhengzhou 450045, China.

ORCID-Profile: Ningning Li

Förderung

  • Henan Province Research-Oriented Teaching Reform Research and Practice Project
  • 2023 Henan Province Research-Oriented Teaching Reform Research and Practice Project
  • Natural Science Foundation of Henan Province
  • Henan Provincial Key Scientific Research Projects in Higher Education Institutions

Zitieren

APA

Chen, X., Zhang, C., Chen, X., & Li, N. (2025). Preparation and Performance of 3D-Printed TiO2-Supported TPMS Structures for Photocatalytic Applications. Molecules, 30(19), 3891. https://doi.org/10.3390/molecules30193891

Vancouver

Chen X, Zhang C, Chen X, Li N. Preparation and Performance of 3D-Printed TiO2-Supported TPMS Structures for Photocatalytic Applications. Molecules. 2025;30(19):3891. doi:10.3390/molecules30193891

BibTeX
@article{Chen2025,
  author = {Chen, Xi and Zhang, Chenxi and Chen, Xiao and Li, Ningning},
  title = {Preparation and Performance of 3D-Printed TiO2-Supported TPMS Structures for Photocatalytic Applications},
  journal = {Molecules},
  year = {2025},
  volume = {30},
  number = {19},
  pages = {3891},
  doi = {10.3390/molecules30193891}
}
Kostenlos starten →