EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Fe on Co-Based SiO2Al2O3 Mixed Support Catalyst for Fischer–Tropsch Synthesis in 3D-Printed SS Microchannel Microreactor

Meric Arslan iD, Sujoy Bepari iD, Juvairia Shajahan iD, Saif Hassan, Debasish Kuila iD

Molecules · 25.08.2025 · 30 (17) · 3486

DOI: 10.3390/molecules30173486 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Molecules, online erschienen am 25.08.2025. Verfasst von Meric Arslan und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Applied Science and Technology, North Carolina Agricultural and Technical State University, Greensboro, NC 27411, USA. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. National Science Foundation, DOE-BES, NSF.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research explores the effect of a composite support of SiO2 and Al2O3 with Fe and Co incorporated as catalysts for Fischer–Tropsch synthesis (FTS) using a 3D-printed stainless steel (SS) microchannel microreactor. Two mesoporous catalysts, FeCo/SiO2Al2O3 and Co/SiO2Al2O3, were synthesized via a one-pot (OP) method and extensively characterized using N2 physisorption, XRD, SEM, TEM, H2-TPR, TGA-DSC, FTIR, and XPS. H2-TPR results revealed that the synthesis method significantly affected the reducibility of metal oxides, thereby influencing the formation of active FTS sites. SEM-EDS and TEM further revealed a well-defined hexagonal matrix with a porous surface morphology and uniform metal ion distribution. FTS reactions, carried out in the 200–350 °C temperature range at 20 bar with a H2/CO molar ratio of 2:1, exhibited the highest activity for FeCo/SiO2Al2O3, with up to 80% CO conversion. Long-term stability was evaluated by monitoring the catalyst performance for 30 h on stream at 320 °C under identical reaction conditions. The catalyst was initially active for the methanation reaction for up to 15 h, after which the selectivity for CH4 declined. Correspondingly, the C4+ selectivity increased after 15 h of time-on-stream, indicating a shift in the product distribution toward longer-chain hydrocarbons. This trend suggests that the catalyst undergoes gradual activation or restructuring under reaction conditions, which enhances chain growth over time. The increase in C4+ products may be attributed to the stabilization of the active sites and suppression of methane or light hydrocarbon formation.

Schlagwörter

Stichwörter der Autor:innen

Fe catalystFischer–Tropsch synthesisco catalystmesoporous composite oxidesilica–alumina supportstainless steel microreactor

Autor:innen und Institutionen

  • Department of Applied Science and Technology, North Carolina Agricultural and Technical State University, Greensboro, NC 27411, USA.
  • Department of Chemistry, North Carolina Agricultural and Technical State University, Greensboro, NC 27411, USA.
  • Joint School of Nanoscience and Nanoengineering, North Carolina Agricultural and Technical State University, Greensboro, NC 27411, USA.

ORCID-Profile: Meric Arslan, Sujoy Bepari, Juvairia Shajahan, Debasish Kuila

Förderung

  • U.S. National Science Foundation
  • DOE-BES
  • NSF
  • NSF-CREST
  • UNC-ROI
  • National Science Foundation

Zitieren

APA

Arslan, M., Bepari, S., Shajahan, J., Hassan, S., & Kuila, D. (2025). Effect of Fe on Co-Based SiO2Al2O3 Mixed Support Catalyst for Fischer–Tropsch Synthesis in 3D-Printed SS Microchannel Microreactor. Molecules, 30(17), 3486. https://doi.org/10.3390/molecules30173486

Vancouver

Arslan M, Bepari S, Shajahan J, Hassan S, Kuila D. Effect of Fe on Co-Based SiO2Al2O3 Mixed Support Catalyst for Fischer–Tropsch Synthesis in 3D-Printed SS Microchannel Microreactor. Molecules. 2025;30(17):3486. doi:10.3390/molecules30173486

BibTeX
@article{Arslan2025,
  author = {Arslan, Meric and Bepari, Sujoy and Shajahan, Juvairia and Hassan, Saif and Kuila, Debasish},
  title = {Effect of Fe on Co-Based SiO2Al2O3 Mixed Support Catalyst for Fischer–Tropsch Synthesis in 3D-Printed SS Microchannel Microreactor},
  journal = {Molecules},
  year = {2025},
  volume = {30},
  number = {17},
  pages = {3486},
  doi = {10.3390/molecules30173486}
}
Kostenlos starten →